SEN-VIB01 - Uncategorized Joy-It - Free user manual and instructions
Find the device manual for free SEN-VIB01 Joy-It in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vibration Sensor Module |
| Brand | Joy-It |
| Model | SEN-VIB01 |
| Operating Voltage | 3.3V – 5V DC |
| Output Type | Digital (HIGH/LOW) |
| Detection Sensitivity | Adjustable via onboard potentiometer |
| Dimensions | 32 mm × 14 mm × 10 mm |
| Weight | 5 g |
| Interface | 3-pin header (VCC, GND, DO) |
| Indicator | LED for power and vibration detection |
| Main Functions | Detects vibration, shock, or tilt; outputs digital signal |
| Application | Arduino, Raspberry Pi, microcontrollers, alarm systems |
| Mounting | Two mounting holes (2 mm diameter) |
| Operating Temperature | -10°C to +70°C |
| Maintenance | Keep dry; clean gently with a soft, dry cloth |
| Safety Precautions | Avoid static discharge, water, and excessive shock |
| Spare Parts & Reparability | Not user-serviceable; no spare parts available |
Frequently Asked Questions - SEN-VIB01 Joy-It
What is the operating voltage of the SEN-VIB01?
The SEN-VIB01 operates on 3.3V to 5V DC.
How do I connect the sensor to an Arduino?
Connect VCC to 5V, GND to GND, and DO to a digital input pin (e.g., pin 2).
What does the DO pin output?
The DO pin outputs a digital HIGH when vibration is detected, and LOW otherwise.
Can I adjust the sensitivity?
Yes, there is an onboard potentiometer to adjust the detection threshold.
Does the module have an LED indicator?
Yes, a red LED lights up when power is applied, and a green LED indicates vibration detection.
What can I use this sensor for?
It is ideal for vibration detection, shock alarms, tilt sensing, and motion detection in DIY projects.
Is it compatible with Raspberry Pi?
Yes, connect VCC to 3.3V, GND to GND, and DO to a GPIO pin. Use a level shifter if needed.
How do I mount the sensor?
It has two mounting holes (2 mm diameter) for screws or standoffs.
What is the typical response time?
The response time is under 10 ms for most vibrations.
Can I use it outdoors?
It is not waterproof; for outdoor use, place it in a weatherproof enclosure.
User questions about SEN-VIB01 Joy-It
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SEN-VIB01 - Joy-It and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SEN-VIB01 by Joy-It.
USER MANUAL SEN-VIB01 Joy-It
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Joy-It
Model : SEN-VIB01
Category : Uncategorized