ARD-DigisparkB - Uncategorized Joy-It - Free user manual and instructions
Find the device manual for free ARD-DigisparkB Joy-It in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Microcontroller Development Board |
| Brand | Joy-It |
| Model | ARD-DigisparkB |
| Microcontroller | ATtiny85 |
| Operating Voltage | 5V (via USB) |
| Input Voltage | 5V (USB powered) |
| Digital I/O Pins | 6 (including 1 PWM output) |
| Analog Input Pins | 2 (A2, A3) |
| Flash Memory | 8 KB (6 KB usable) |
| SRAM | 512 bytes |
| EEPROM | 512 bytes |
| Clock Speed | 16.5 MHz |
| Dimensions | Approximately 25 x 20 mm |
| Weight | ~5 g |
| Power Supply | USB 5V or external 5V via pin |
| USB Interface | USB 1.1/2.0 (Micro USB) |
| Programming Environment | Arduino IDE (with Digispark board support) |
| Main Features | Small form factor, USB connectivity, Arduino-compatible, low power consumption |
| Maintenance and Cleaning | Keep dry, avoid static discharge, clean with soft dry cloth |
| Safety | Operate within specified voltage, do not short circuit, avoid moisture |
| Spare Parts and Repairability | Non-repairable at component level; replaceable as a module |
| General Information | Ideal for learning, prototyping, and small embedded projects |
Frequently Asked Questions - ARD-DigisparkB Joy-It
What is the ARD-DigisparkB?
The ARD-DigisparkB is a miniature microcontroller development board based on the ATtiny85, compatible with the Arduino IDE. It is designed for small projects and prototyping.
How do I program the ARD-DigisparkB?
You can program it using the Arduino IDE after installing the Digispark board package. Connect via USB and upload sketches as with standard Arduino boards.
What is the input voltage range?
The board operates at 5V and can be powered via USB (5V) or an external 5V supply connected to the VCC pin.
How many I/O pins does it have?
It has 6 digital I/O pins (including one PWM) and 2 analog input pins (A2, A3). Note that some pins are used for USB communication.
Can I use it with sensors?
Yes, you can connect various sensors and actuators. The board supports analog and digital inputs/outputs, but be mindful of the limited number of pins and memory.
What is the memory capacity?
The ATtiny85 has 8 KB of flash memory (6 KB usable after bootloader), 512 bytes of SRAM, and 512 bytes of EEPROM.
How do I install the Digispark drivers?
On Windows, you may need to install drivers manually. On macOS and Linux, drivers are usually built-in. Refer to the Digispark tutorial for step-by-step instructions.
Is the board 5V or 3.3V logic?
The board operates at 5V logic levels. If you need to interface with 3.3V devices, use a level shifter.
Can I power it with a battery?
Yes, you can power it with a 5V battery or a regulated 5V supply. Do not exceed 5.5V.
Where can I find the schematic?
The schematic is typically included in the product manual or available on the Joy-It website under the product page.
User questions about ARD-DigisparkB Joy-It
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ARD-DigisparkB - Joy-It and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARD-DigisparkB by Joy-It.
USER MANUAL ARD-DigisparkB Joy-It
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Joy-It
Model : ARD-DigisparkB
Category : Uncategorized