DAIKIN

3AMX52E4V1B - Air Conditioning DAIKIN - Free user manual and instructions

Find the device manual for free 3AMX52E4V1B DAIKIN in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice DAIKIN 3AMX52E4V1B - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeMulti-Split Air Conditioner Outdoor Unit
BrandDaikin
Model3AMX52E4V1B
Dimensions (H x W x D)735 x 840 x 330 mm
Weight60 kg
Power Supply230 V ~ 50 Hz, Single Phase
RefrigerantR410A
Cooling Capacity5.2 kW
Heating Capacity5.8 kW
FunctionsCooling, Heating, Fan, Dehumidifier, Auto Mode
Noise Level (Outdoor)50 dB(A)
Operating Temperature Range (Cooling)-15°C to 46°C
Operating Temperature Range (Heating)-20°C to 24°C
Piping Connection (Liquid)6.35 mm (1/4 inch)
Piping Connection (Gas)12.7 mm (1/2 inch)
Max. Total Piping Length50 m
Max. Height Difference15 m
Energy Efficiency Ratio (EER)3.2
Inverter TechnologyYes
Defrost ModeAutomatic
MaintenanceClean air filters every 2 weeks; check coils annually
Safety FeaturesOvercurrent protection, earth leakage breaker, high-pressure switch
Spare Parts AvailabilityThrough Daikin authorized dealers
Warranty5 years (parts and labor)
CertificationsCE, CB, RoHS

Frequently Asked Questions - 3AMX52E4V1B DAIKIN

How do I install the Daikin 3AMX52E4V1B outdoor unit?
Installation must be performed by a qualified professional. Ensure a stable, level base with adequate clearance for airflow. Connect refrigerant lines, electrical wiring, and drain pipes as per the manual. Pressure test and vacuum the system before releasing refrigerant.
What is the maximum piping length between outdoor and indoor units?
The maximum total piping length is 50 meters with a maximum height difference of 15 meters between units.
Can I use the unit for cooling only or also for heating?
This model is a heat pump system, providing both cooling and heating functions. It can also operate in fan and dehumidifier modes.
How often should I clean the indoor unit filters?
Clean the air filters every 2 weeks under normal usage. More frequent cleaning may be needed if the environment is dusty.
What type of refrigerant does this unit use?
The unit uses R410A refrigerant, which is environmentally friendly and efficient.
What are the electrical requirements for the 3AMX52E4V1B?
The unit requires a 230 V ~ 50 Hz single-phase power supply. A dedicated circuit with appropriate breaker (e.g., 20A) is recommended.
Why is my unit not heating properly?
Check if the air filters are clean, ensure the set temperature is higher than room temperature, and allow the unit time to defrost if outdoor temperature is very low. If problem persists, contact a technician.
Can I connect multiple indoor units to this outdoor unit?
Yes, the 3AMX52E4V1B is a multi-split outdoor unit designed to connect up to 5 indoor units (depending on capacity). Refer to the manual for compatible indoor models.
What should I do if the error code appears?
Turn off the unit and disconnect power for a few minutes, then restart. If the error persists, note the code (e.g., E3, H9) and contact a Daikin service center for diagnosis.
Is the unit noisy during operation?
The outdoor unit noise level is approximately 50 dB(A), which is comparable to a quiet conversation. Indoor units are even quieter.

User questions about 3AMX52E4V1B DAIKIN

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air Conditioning in PDF format for free! Find your manual 3AMX52E4V1B - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3AMX52E4V1B by DAIKIN.

USER MANUAL 3AMX52E4V1B DAIKIN

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : DAIKIN

Model : 3AMX52E4V1B

Category : Air Conditioning