PLA88CS - Router Blustream - Free user manual and instructions
Find the device manual for free PLA88CS Blustream in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Blustream |
| Model | PLA88CS |
| Dimensions (W x D x H) | 8.5 x 5.5 x 2.0 inches (216 x 140 x 51 mm) |
| Weight | 1.1 lbs (0.5 kg) |
| Power Supply | 12V DC, 1A (external adapter) |
| Wireless Standards | IEEE 802.11 a/b/g/n/ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | Up to 1200 Mbps (300 Mbps 2.4 GHz + 867 Mbps 5 GHz) |
| WAN Ports | 1 x Gigabit RJ45 |
| LAN Ports | 4 x Gigabit RJ45 |
| USB Ports | 1 x USB 2.0 |
| Antennas | 4 x external fixed antennas |
| Security | WPA2-PSK, WPA3, WEP, SPI firewall |
| VPN Support | PPTP, L2TP, OpenVPN |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, WAN, LAN (4), Wireless, USB |
| Reset Button | Yes (pinhole) |
| Maintenance | Clean with a dry, soft cloth. Do not use liquid cleaners. |
| Repair | No user-serviceable parts inside. Contact support for repairs. |
Frequently Asked Questions - PLA88CS Blustream
How do I reset my Blustream PLA88CS router to factory defaults?
Locate the reset pinhole on the back panel. Use a paperclip to press and hold the button for 10 seconds while the router is powered on. Release when the LED blinks. The router will reboot with default settings.
What is the default IP address to access the router's web interface?
The default IP address is 192.168.1.1. Enter this in your browser's address bar. Default username and password are both 'admin' (case-sensitive).
How do I change the Wi-Fi password on my PLA88CS?
Log in to the web interface, go to Wireless Settings > Security. Select your encryption (e.g., WPA2-PSK) and enter a new passphrase. Click Save and reboot if prompted.
Can I use the PLA88CS as a wireless repeater?
Yes. In the web interface, enable 'Repeater Mode' under Operation Mode. Scan for your existing Wi-Fi, enter its password, and configure the repeater SSID.
Why is my internet connection dropping frequently?
Check for interference from other electronics, update firmware, and ensure the router is well-ventilated. Also verify your ISP connection by connecting a PC directly to the modem.
How do I update the firmware on my Blustream router?
Download the latest firmware from the Blustream support page. Log in to the web interface, go to System Tools > Firmware Upgrade, select the file, and click Upgrade. Do not power off during update.
What should I do if I forget my router login password?
Perform a factory reset using the reset button (see first FAQ). This will restore default credentials. After reset, set a new password immediately.
How can I improve the Wi-Fi range of my PLA88CS?
Place the router centrally, away from walls and metal objects. Adjust antennas vertically. Change the wireless channel to a less congested one. Consider using a Wi-Fi extender.
Does the PLA88CS support IPTV or VLAN?
Yes. Go to Advanced > IPTV/VLAN to configure ISP-specific settings. Enable IGMP snooping for multicast streaming.
How do I set up a guest Wi-Fi network?
Log in to the web interface, go to Wireless Settings > Guest Network. Enable the guest SSID, set a password, and configure access restrictions. Save settings.
User questions about PLA88CS Blustream
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual PLA88CS - Blustream and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLA88CS by Blustream.
USER MANUAL PLA88CS Blustream
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Blustream
Model : PLA88CS
Category : Router