62935 - Water pump WilTec - Free user manual and instructions
Find the device manual for free 62935 WilTec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Submersible Water Pump |
| Brand | WilTec |
| Model | 62935 |
| Voltage | 230 V ~ 50 Hz |
| Power | 800 W |
| Max Flow Rate | 6000 L/h |
| Max Head | 8 m |
| Inlet/Outlet Diameter | 1 inch (25 mm) |
| Material | Stainless steel and cast iron |
| Dimensions (L x W x H) | 20 x 15 x 15 cm |
| Weight | 4 kg |
| Cable Length | 10 m |
| Protection Class | IP68 |
| Features | Thermal overload protection, built-in float switch, corrosion-resistant |
| Maintenance | Regularly clean filter and impeller; check seals |
| Cleaning | Use fresh water to rinse; avoid solvents |
| Safety | Always disconnect power before maintenance; do not run dry |
| Spare Parts | Impeller, seals, float switch available |
| Reparability | Repairable with standard tools; consult manual |
Frequently Asked Questions - 62935 WilTec
How do I prime the WilTec 62935 water pump?
Ensure the pump is fully submerged in water before starting. The pump is self-priming once submerged. Turn on the power and the pump will start automatically. If the pump runs dry, it may be damaged.
Can the pump be used with dirty or muddy water?
This pump is designed for clean or slightly dirty water with particle sizes up to 5 mm. For heavily contaminated water, a different pump type is recommended.
What is the maximum operating depth?
The maximum submersion depth is 8 meters. Do not exceed this depth to avoid damage to the seals and motor.
How often should I clean the pump?
Clean the pump after each use or at least every month if used frequently. Remove debris from the inlet filter and rinse with clean water.
Does the pump have automatic shut-off?
Yes, the built-in float switch automatically turns the pump off when the water level drops, preventing dry running.
Can I use the pump in saltwater?
No, this pump is not designed for saltwater. Corrosion may occur. Use only in fresh water.
What does the thermal protection do?
The thermal overload protection automatically shuts off the pump if it overheats, preventing motor damage. Once cooled, it will restart.
How do I replace the impeller?
Disconnect the power, remove the front cover, unscrew the impeller, and replace with a new one. Refer to the manual for detailed steps.
The pump won't start. What could be wrong?
Check the power supply, ensure the float switch is not stuck, and verify the pump is submerged. If the thermal protection has tripped, wait for it to cool down.
Where can I find spare parts?
Spare parts such as impellers, seals, and float switches are available through WilTec's official website or authorized dealers.
User questions about 62935 WilTec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual 62935 - WilTec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 62935 by WilTec.
USER MANUAL 62935 WilTec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WilTec
Model : 62935
Category : Water pump