MR44 - Access Point Meraki - Free user manual and instructions
Find the device manual for free MR44 Meraki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Point |
| Brand | Meraki |
| Model | MR44 |
| Dimensions (L x W x H) | 200 mm x 200 mm x 50 mm |
| Weight | 0.5 kg |
| Power Supply | PoE (802.3at) or 12V DC adapter |
| Wireless Standard | Wi-Fi 6 (802.11ax) |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | Up to 2.7 Gbps |
| Ethernet Ports | 1 x 10/100/1000 Base-T |
| Management | Cloud-based via Meraki Dashboard |
| Mounting | Wall or ceiling mount (hardware included) |
| Operating Temperature | 0°C to 40°C |
| Security | WPA3, 802.1X, VLAN, firewall, intrusion detection |
| LED Indicators | Power, WAN, LAN, wireless status |
| Maintenance | Clean with dry cloth; no liquids |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - MR44 Meraki
How do I set up the Meraki MR44?
Connect the MR44 to your network via PoE or the included power adapter. Plug it into your switch/router and assign it to your network via the Meraki Dashboard. The device will automatically download its configuration.
Can the MR44 be mounted on a wall or ceiling?
Yes, the MR44 includes a mounting plate for both wall and ceiling installations. Use the provided screws and anchors to secure the plate, then attach the access point.
What power options are available?
The MR44 supports Power over Ethernet (PoE) with 802.3at standards. Alternatively, you can use the optional 12V DC power adapter (not included).
How do I reset the MR44 to factory defaults?
Locate the small reset button on the back of the device. Press and hold it with a paperclip for at least 10 seconds until the LED flashes. The device will reboot with default settings.
Does the MR44 support Wi-Fi 6?
Yes, the MR44 is a Wi-Fi 6 (802.11ax) access point, offering higher speeds, better capacity, and improved performance in congested environments.
How do I manage the MR44?
The MR44 is managed entirely through the Cisco Meraki Dashboard, a cloud-based interface. No on-premises controller is required.
Can I use multiple MR44 units together?
Yes, multiple MR44s can be centrally managed via the Meraki Dashboard to create a seamless mesh network with features like band steering and load balancing.
What security features does the MR44 offer?
The MR44 supports WPA3, 802.1X authentication, VLAN tagging, stateful firewall, and integrated intrusion detection/prevention.
How do I update the firmware on the MR44?
Firmware updates are handled automatically by the Meraki Dashboard. You can schedule updates or apply them immediately from the dashboard's Network-wide > Firmware upgrades section.
What is the maximum number of clients the MR44 can support?
The MR44 can support up to 500 simultaneous clients under ideal conditions, but typical performance may vary based on environment and traffic patterns.
User questions about MR44 Meraki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual MR44 - Meraki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MR44 by Meraki.
USER MANUAL MR44 Meraki
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Meraki
Model : MR44
Category : Access Point