S490 - Digital decoder i-CAN - Free user manual and instructions
Find the device manual for free S490 i-CAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Decoder (Set-Top Box) |
| Brand | i-CAN |
| Model | S490 |
| Dimensions (Approx.) | 15 cm x 10 cm x 4 cm |
| Weight (Approx.) | 500 g |
| Power Supply | DC 5V, 1A |
| Video Output | HDMI, Composite (RCA) |
| Audio Output | HDMI, Optical, Analog Stereo |
| USB Port | 1 x USB 2.0 for media playback |
| Supported TV Standards | DVB-T/T2, DVB-C, DVB-S/S2 |
| Resolution | Up to 1080p Full HD |
| Media Playback | MPEG-2/4, H.264, H.265, MP3, JPEG |
| Electronic Program Guide (EPG) | Supported |
| Parental Control | Channel locking with PIN |
| Remote Control | Infrared, included |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids. |
| Safety Warnings | Keep away from water and moisture. Do not block ventilation. |
| Spare Parts & Repairability | Contact authorized service center. No user-serviceable parts inside. |
| General Information | Firmware updates via USB. Compatible with HDCP. |
Frequently Asked Questions - S490 i-CAN
How do I set up the i-CAN S490 digital decoder?
Connect the decoder to your TV via HDMI or composite cable, plug in the power supply, and connect the antenna or cable. Turn on the decoder and follow the on-screen installation wizard to scan for channels.
Can I record TV shows with this decoder?
The S490 does not have a built-in recording function. However, you can connect a USB storage device to play back recorded media from other sources.
Why is the decoder not finding any channels?
Ensure the antenna or cable is firmly connected. Go to the channel scan menu and select the correct country and signal type (DVB-T/C/S). If issues persist, check your antenna alignment or signal strength.
How do I update the firmware on the S490?
Download the latest firmware from the i-CAN support website, save it to a FAT32 formatted USB drive, insert it into the USB port, and navigate to Settings > Software Update > USB update.
The remote control does not work. What should I do?
Replace the batteries with new ones, ensure there are no obstacles between the remote and the decoder, and point the remote directly at the IR receiver on the front panel.
Can I connect the decoder to a soundbar or home theater?
Yes, you can use the optical audio output or the analog stereo RCA outputs to connect to an external audio system.
How do I reset the decoder to factory settings?
Go to Menu > Settings > Factory Reset. Confirm with the default PIN (usually 0000). This will erase all personal settings and channel lists.
What does the 'No Signal' message mean?
This indicates that the decoder is not receiving a valid signal from the antenna or cable. Check your connections and try rescanning channels.
How can I enable subtitles?
Press the SUBTITLE button on the remote during a program. If subtitles are available, they will appear. You can also configure subtitle preferences in the settings menu.
Is the decoder compatible with 4K TVs?
The S490 supports up to 1080p Full HD output. It will work with a 4K TV but the picture will be upscaled by the TV, not native 4K.
User questions about S490 i-CAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Digital decoder in PDF format for free! Find your manual S490 - i-CAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S490 by i-CAN.
USER MANUAL S490 i-CAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : i-CAN
Model : S490
Category : Digital decoder