DS-PDC10AM-EG2-WE - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PDC10AM-EG2-WE Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hikvision |
| Model | DS-PDC10AM-EG2-WE |
| Product Type | Wireless Alarm System Detector |
| Communication | Wireless (RF 868 MHz) |
| Power Supply | DC 12V (adapter) or 3V CR123A battery |
| Battery Life | Up to 2 years with typical use |
| Dimensions (H x W x D) | 120 x 60 x 40 mm |
| Weight | 150 g |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | Up to 10 m, 90° angle |
| Alarm Output | Internal buzzer (85 dB) |
| Tamper Protection | Yes, anti-tamper switch |
| Operating Temperature | -10°C to 50°C |
| Operating Humidity | 0% to 95% non-condensing |
| Indoor/Outdoor Use | Indoor only |
| Compatibility | Hikvision alarm control panels |
| LED Indicator | Red/Green for status |
| Low Battery Indication | Yes, periodic beeps |
| Maintenance | Clean with dry soft cloth; do not use solvents |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - DS-PDC10AM-EG2-WE Hikvision
How do I install the DS-PDC10AM-EG2-WE?
Mount the detector on a wall at 2-2.5 m height using the included screws. Ensure the detection area is clear of obstructions. Insert the battery or connect the DC adapter. Pair with your Hikvision alarm panel as per the manual.
What type of battery does it use and how long does it last?
It uses a 3V CR123A lithium battery. Battery life is typically up to 2 years under normal usage. The device will beep periodically when the battery is low.
Can I connect this detector to my smartphone?
The detector itself does not connect directly to a smartphone. It communicates wirelessly with a compatible Hikvision alarm panel, which can be controlled via the Hik-Connect app.
Does it support wireless communication?
Yes, it uses RF 868 MHz wireless communication to connect with Hikvision alarm panels. The wireless range is typically up to 100 m in open space.
How do I reset the device to factory settings?
Press and hold the tamper switch for 10 seconds until the LED flashes rapidly. Release and wait for the device to restart. This clears all pairings.
What is the detection range and angle of the PIR sensor?
The detection range is up to 10 meters with a 90-degree horizontal field of view. The sensor is optimized for indoor use.
Can this detector be used outdoors?
No, the DS-PDC10AM-EG2-WE is designed for indoor use only. Exposure to weather may damage it and void the warranty.
How do I change the battery?
Remove the front cover by sliding it upward. The battery compartment is on the back. Replace the CR123A battery with a new one, ensuring correct polarity, and reattach the cover.
Is this detector compatible with other Hikvision panels?
It is compatible with most Hikvision alarm control panels that support the 868 MHz wireless protocol. Check your panel's specifications or consult Hikvision support.
What should I do if the alarm triggers falsely?
Ensure the detector is not placed near heat sources, windows with moving curtains, or pets. Adjust the sensitivity via the panel settings if possible. Clean the lens with a soft cloth.
User questions about DS-PDC10AM-EG2-WE Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PDC10AM-EG2-WE - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PDC10AM-EG2-WE by Hikvision.
USER MANUAL DS-PDC10AM-EG2-WE Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PDC10AM-EG2-WE
Category : Alarm system