Vantage Vue - Weather Station DAVIS - Free user manual and instructions
Find the device manual for free Vantage Vue DAVIS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Weather Station |
| Brand | Davis Instruments |
| Model | Vantage Vue |
| Dimensions (Sensor Suite) | Approximately 12 x 12 x 10 inches (30 x 30 x 25 cm) |
| Dimensions (Console) | Approximately 6.5 x 4.5 x 1.25 inches (16.5 x 11.4 x 3.2 cm) |
| Weight (Sensor Suite) | Approximately 1.9 lbs (0.86 kg) |
| Weight (Console) | Approximately 0.6 lbs (0.27 kg) |
| Power Supply (Sensor Suite) | Solar panel with supercapacitor; backup 2 x AA batteries (not included) |
| Power Supply (Console) | AC adapter (included) or 3 x AAA batteries (not included) |
| Transmission Frequency | 915 MHz (US) or 868 MHz (EU) |
| Wireless Range | Up to 1000 feet (300 meters) line of sight |
| Measured Parameters | Temperature, Humidity, Wind Speed & Direction, Rainfall, Barometric Pressure |
| Display Type | LCD console with backlight |
| Data Logging | Stores up to 2560 archived records (interval selectable) |
| Computer Connectivity | USB data logger (optional, WeatherLink) |
| Mounting | Mounting pole (included) or optional tripod |
| Operating Temperature | -40°F to 150°F (-40°C to 65°C) for sensor; 32°F to 140°F (0°C to 60°C) for console |
| Rain Collector | Self-emptying tipping bucket, 0.01 inch resolution |
| Anemometer | Wind cups, measures up to 180 mph (160 kts) |
| Wind Vane | Wind direction sensor with 360° rotation |
| Cleaning Instructions | Wipe with a damp cloth; clean rain collector and anemometer periodically |
| Battery Replacement | Replace sensor backup batteries every 2-3 years; console batteries as needed |
| Safety Warnings | Install sensor securely; avoid mounting near interference sources; use surge protection |
| Spare Parts Available | Replacement anemometer, rain collector, radiation shield, console, and batteries |
| Reparability | User-replaceable components; professional calibration recommended for accuracy |
Frequently Asked Questions - Vantage Vue DAVIS
How do I set up the Vantage Vue weather station?
Mount the sensor suite on a pole or tripod at least 5 feet (1.5 m) above the ground. Insert batteries into the sensor (2 AA) and console (3 AAA or AC adapter). The console will automatically sync with the sensor within a few minutes.
What does the 'No Signal' message mean?
This indicates the console is not receiving data from the sensor suite. Check that the sensor batteries are fresh, the sensor is within range (1000 ft / 300 m), and there are no obstructions. Press and hold the RECEPTION button on the console to force a resync.
How often should I replace the batteries?
The sensor backup batteries should last 2-3 years under normal conditions. The console batteries (if using) may last several months to a year. Always use high-quality alkaline or lithium batteries.
How do I clean the rain collector?
Remove the rain collector by twisting it off. Rinse with warm water and a soft brush to remove debris. Do not use harsh chemicals. Ensure the tipping bucket moves freely before reinstalling.
Can I connect the Vantage Vue to my computer?
Yes, with the optional WeatherLink data logger (USB or IP). Insert the logger into the console's expansion port and install the WeatherLink software to download and view data.
What is the maximum wind speed the station can measure?
The anemometer can measure wind speeds up to 180 mph (160 kts, or 290 km/h). Gust speeds are also recorded.
How do I interpret barometric pressure readings?
The console displays barometric pressure in inches of mercury (inHg) or millibars (hPa). A rising pressure usually indicates improving weather, while falling pressure suggests approaching storms. The TREND arrows show direction of change.
What is the warranty coverage?
Davis Instruments offers a limited warranty of 2 years for the Vantage Vue. It covers defects in materials and workmanship. Register your product online to activate warranty.
Can I mount the sensor on a roof?
Yes, but ensure it is securely attached to a sturdy pole or mast. Avoid roof edges where wind turbulence may affect readings. Follow the mounting instructions in the manual.
How do I reset the console to factory settings?
Press and hold the DONE and GRAPH buttons simultaneously for about 5 seconds. The console will display 'CLEAR' then reset all settings. Note that this erases all archived data.
User questions about Vantage Vue DAVIS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Weather Station in PDF format for free! Find your manual Vantage Vue - DAVIS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vantage Vue by DAVIS.
USER MANUAL Vantage Vue DAVIS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAVIS
Model : Vantage Vue
Category : Weather Station