Electro Harmonix

Stereo Memory Man with Hazarai - Uncategorized Electro Harmonix - Free user manual and instructions

Find the device manual for free Stereo Memory Man with Hazarai Electro Harmonix in PDF.

📄 20 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Electro Harmonix Stereo Memory Man with Hazarai - page 1
1 / 20
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeStereo Delay & Looper Pedal
BrandElectro Harmonix
ModelStereo Memory Man with Hazarai
Dimensions5.75 x 4.5 x 2.25 inches
Weight0.9 lb (408 g)
Power Supply9V DC, center negative, 150 mA (not included)
Inputs2 x 1/4" TS (stereo input)
Outputs2 x 1/4" TS (stereo output)
Delay TimeUp to 3 seconds
ModesMulti-Tap, Reverse, Filter, Looper, Chorus, Flanger, Echo, etc.
Presets8 user-programmable presets
ControlsMode, Delay, Feedback, Blend, Level, Tap Tempo, Expression Pedal input
Sampling Rate24-bit, 44.1 kHz
True BypassYes, electromechanical relay switching
LED IndicatorsMode and status LEDs
ConstructionCompact die-cast chassis
MaintenanceClean with a soft, dry cloth. Avoid solvents.
SafetyUse only specified power adapter. Do not expose to moisture.
Spare Parts & RepairabilityNo user-serviceable parts. Contact EHX support for repairs.
General InformationDesigned and assembled in New York City, USA.

Frequently Asked Questions - Stereo Memory Man with Hazarai Electro Harmonix

How do I save a preset on the Stereo Memory Man?
To save a preset, press and hold the Save button (or the Mode knob depending on firmware) until the LED flashes, then select a preset slot using the knobs. Confirm by pressing Save again.
How do I use the built-in looper?
Set the mode knob to Looper. Press the footswitch to start recording, press again to stop and playback, press twice quickly to overdub, and hold to undo/redo.
Can I connect a expression pedal?
Yes, you can connect a standard expression pedal (e.g., Roland EV-5) to the Exp input to control parameters like delay time or feedback.
What power supply should I use?
Use a 9V DC power supply with center negative polarity and at least 150 mA current rating. Examples: Electro Harmonix 9.6DC-200 or similar.
How do I perform a factory reset?
Press and hold the Save and Mode buttons while powering on the unit. Release when the LEDs flash. This will reset all presets to default.
What is the maximum delay time?
The maximum delay time is 3 seconds in most modes. In looper mode, you can record up to 15 seconds depending on firmware version.
Can I use it with mono input?
Yes, you can use a single mono input. The pedal will still output stereo effects based on the selected algorithm.
How do I select different delay modes?
Turn the Mode knob to the desired mode: Echo, Multi-Tap, Reverse, Filter, Chorus, Flanger, Looper, etc. The LED will indicate the selected mode.
Is the pedal true bypass?
Yes, the Stereo Memory Man with Hazarai uses true bypass via a mechanical relay, ensuring no signal degradation when the effect is off.
Where can I find the full manual?
You can download the official manual in PDF format from the Electro Harmonix website or from notice-facile.com using the download link provided.

User questions about Stereo Memory Man with Hazarai Electro Harmonix

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Stereo Memory Man with Hazarai - Electro Harmonix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stereo Memory Man with Hazarai by Electro Harmonix.

USER MANUAL Stereo Memory Man with Hazarai Electro Harmonix

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Electro Harmonix

Model : Stereo Memory Man with Hazarai

Category : Uncategorized