M2 - Uncategorized Banana Pi - Free user manual and instructions
Find the device manual for free M2 Banana Pi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Single-board computer |
| Model | M2 |
| Brand | Banana Pi |
| Processor | Allwinner A20 dual-core ARM Cortex-A7 |
| RAM | 1 GB DDR3 |
| Storage | MicroSD card slot, NAND flash (4 GB) |
| Networking | 10/100/1000 Mbit/s Ethernet, Wi-Fi 802.11 b/g/n, Bluetooth 4.0 |
| USB Ports | 2x USB 2.0, 1x USB OTG |
| Video Output | HDMI, composite, LVDS (onboard connector) |
| Audio | 3.5 mm audio jack, HDMI audio |
| GPIO | 40-pin header compatible with Raspberry Pi |
| Operating System | Android, Linux (Ubuntu, Debian, etc.) |
| Power Supply | 5 V DC, 2 A via Micro USB |
| Dimensions | 92 mm x 60 mm |
| Weight | Approx. 50 g |
| Primary Functions | General-purpose computing, media center, IoT, server, education |
| Cleaning | Use a soft dry cloth; avoid liquids |
| Safety | Do not expose to moisture or heat sources; use only supplied power adapter |
| Spare Parts & Repairability | Not user-serviceable; no official spare parts available |
| General Information | Open-source hardware; community-supported |
Frequently Asked Questions - M2 Banana Pi
What operating systems can I install on Banana Pi M2?
You can install various operating systems including Android, Ubuntu, Debian, Raspbian, and other Linux distributions. Images are available on the Banana Pi official website.
How do I connect to the Banana Pi M2 via SSH?
Connect the board to your network via Ethernet. Find its IP address from your router's DHCP client list. Then use an SSH client (e.g., PuTTY on Windows or terminal on Linux/Mac) with default credentials (username: pi, password: raspberry or similar, depends on the image).
What is the GPIO pin layout of Banana Pi M2?
The GPIO header is a 40-pin layout compatible with Raspberry Pi models. Pin 1 provides 3.3V, pin 2 provides 5V, and others are GPIO, I2C, SPI, UART, etc. Refer to the official pinout diagram for exact mapping.
Does Banana Pi M2 support Wi-Fi and Bluetooth?
Yes, the board integrates Wi-Fi 802.11 b/g/n and Bluetooth 4.0 via an onboard module. You may need to enable them in the operating system.
How can I power the Banana Pi M2?
Use a 5V DC power supply with at least 2A current output. Connect it to the Micro USB port. Avoid using phone chargers with insufficient current.
Can I use a Raspberry Pi case for Banana Pi M2?
The board dimensions (92 x 60 mm) are similar to Raspberry Pi, so many standard Pi cases may fit, but check for port alignment, especially the Ethernet and USB positions.
Is Banana Pi M2 compatible with Raspberry Pi HATs?
Many HATs designed for Raspberry Pi (40-pin GPIO) are electrically compatible. However, software support may vary. Check community forums for specific HAT compatibility.
How do I install an OS on a microSD card for Banana Pi M2?
Download the OS image (e.g., Armbian or Android) from the official site. Use a tool like BalenaEtcher or dd to write the image to the microSD card. Insert the card and power on the board.
What is the maximum resolution supported by HDMI?
The Allwinner A20 supports 1080p (1920x1080) full HD output via HDMI. It can also output composite video for older displays.
How to update the firmware or bootloader on Banana Pi M2?
Firmware updates are done by flashing a new image to the microSD card or NAND. For bootloader updates, use the sunxi-tools and follow instructions on the Banana Pi Wiki. Be careful as incorrect flashing can brick the device.
User questions about M2 Banana Pi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual M2 - Banana Pi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M2 by Banana Pi.