Inventure - 3D Printer Zortrax - Free user manual and instructions
Find the device manual for free Inventure Zortrax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3D Printer |
| Brand | Zortrax |
| Model | Inventure |
| Dimensions (W x D x H) | 495 x 545 x 590 mm |
| Weight | 33 kg |
| Power Supply | 100-240 V, 50/60 Hz, 400 W |
| Build Volume | 300 x 300 x 300 mm |
| Layer Resolution | 0.09 - 0.39 mm |
| Filament Diameter | 1.75 mm |
| Number of Extruders | 2 (Dual extrusion) |
| Print Bed | Heated, automatic leveling |
| Connectivity | Wi-Fi, USB, Ethernet |
| Display | 5-inch color touchscreen |
| Enclosure | Closed chamber with door |
| Supported Materials | Z-ABS, Z-PETG, Z-ULTRAT, Z-SUPPORT, Z-PLA |
| Maintenance | Clean print bed regularly; replace nozzle and drive gears as needed |
| Safety Features | Overheat protection, automatic shutdown, enclosed design |
| Spare Parts Availability | Official Zortrax store: nozzles, print beds, drive gears, hotends |
| Repairability | User-replaceable components with available guides |
Frequently Asked Questions - Inventure Zortrax
How do I level the print bed on the Zortrax Inventure?
The Inventure features automatic bed leveling. During calibration, the nozzle touches several points on the bed, and the system adjusts accordingly. No manual leveling is needed.
What materials can I use with the Inventure?
The printer supports Zortrax proprietary filaments: Z-ABS, Z-PETG, Z-ULTRAT, Z-SUPPORT, and Z-PLA. Using other brands may affect print quality.
How do I connect the printer to Wi-Fi?
Go to Settings > Network on the touchscreen, select your Wi-Fi network, and enter the password. You can also use Zortrax Z-Code software to send prints wirelessly.
What should I do if the nozzle is clogged?
Heat the nozzle to the material's printing temperature, then use the unclogging tool provided. If that fails, replace the nozzle with a genuine Zortrax spare.
How often should I clean the print bed?
Clean the bed with isopropyl alcohol after every few prints to remove residue. For stubborn debris, use a plastic scraper.
Can I use third-party filaments?
While the Inventure is optimized for Zortrax filaments, you can try third-party materials. Adjust printing parameters manually, but success is not guaranteed.
How do I update the firmware?
Download the latest firmware from the Zortrax website, save it to a USB drive, and insert it into the printer. Go to Settings > Update and follow the on-screen instructions.
What is the maximum print speed?
The recommended print speed is 30-60 mm/s. Speeds above 80 mm/s may affect quality.
How do I replace the print bed?
Remove the screws on the bed using a Phillips screwdriver, detach the heater and thermistor cables, then install the new bed and recalibrate.
Why is my print not sticking to the bed?
Ensure the bed is clean and level. You can apply Zortrax Glue Stick or increase the bed temperature by 5-10°C. Also check the first layer height.
User questions about Inventure Zortrax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Printer in PDF format for free! Find your manual Inventure - Zortrax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Inventure by Zortrax.
USER MANUAL Inventure Zortrax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zortrax
Model : Inventure
Category : 3D Printer