FOSCAM

SD4 - Surveillance Camera FOSCAM - Free user manual and instructions

Find the device manual for free SD4 FOSCAM in PDF.

📄 80 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice FOSCAM SD4 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeSurveillance Camera, PTZ
ModelSD4 (Foscam)
DimensionsApprox. 120 x 100 x 100 mm
WeightApprox. 500 g
Power SupplyDC 12V ±5%
Pan & Tilt RangePan: 0°–350°, Tilt: 0°–90°
ResolutionUp to 1920x1080 (Full HD)
Night VisionUp to 10 meters (IR LEDs)
Motion DetectionYes, with adjustable sensitivity
AudioBuilt-in microphone and speaker
StorageMicroSD card up to 128 GB, cloud options
ConnectivityWi-Fi 802.11 b/g/n
WeatherproofNot specified; designed for indoor/outdoor with housing
MaintenanceClean lens with soft dry cloth; avoid water ingress
SecurityWPA2 encryption, firmware updates
Spare Parts & RepairabilityNot user-serviceable; contact support for repairs
General InformationCompatible with Foscam app and third-party software (e.g., ONVIF)

Frequently Asked Questions - SD4 FOSCAM

How do I set up the Foscam SD4 for the first time?
Download the Foscam app, create an account, and follow the in-app wizard to connect the camera to your Wi-Fi network. Ensure the camera is powered on and near your router during setup.
Can the SD4 be used outdoors?
The SD4 is designed for indoor/outdoor use with an appropriate housing. It is not fully waterproof, so protect it from direct rain or submersion.
How far can the SD4 see at night?
With its infrared LEDs, the night vision range is up to 10 meters (33 feet) in complete darkness.
Does the SD4 support two-way audio?
Yes, it has a built-in microphone and speaker, allowing you to listen and talk through the Foscam app.
What is the maximum microSD card capacity supported?
The SD4 supports microSD cards up to 128 GB (Class 10 or higher recommended).
How do I reset the camera to factory settings?
Press and hold the reset button (located on the camera) for about 10 seconds until you hear a beep. The camera will restart and be ready to pair again.
Can I mount the camera on a ceiling or wall?
Yes, the SD4 can be mounted on a ceiling or wall using the included bracket. Ensure the bracket is securely fixed to a solid surface.
How do I update the firmware on the SD4?
Open the Foscam app, go to Device Settings > Firmware Update. The app will check for updates and guide you through the installation if available.
Does the SD4 work with Amazon Alexa or Google Assistant?
Yes, it is compatible with Alexa and Google Assistant for voice control through the Foscam skill or action.
What is the pan/tilt range?
The camera can pan 0° to 350° horizontally and tilt up to 90° vertically, giving you wide coverage.

User questions about SD4 FOSCAM

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Surveillance Camera in PDF format for free! Find your manual SD4 - FOSCAM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SD4 by FOSCAM.

USER MANUAL SD4 FOSCAM

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : FOSCAM

Model : SD4

Category : Surveillance Camera