WS-8157OAK-IT - Clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free WS-8157OAK-IT LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Atomic Clock with Indoor/Outdoor Temperature |
| Brand | La Crosse Technology |
| Model | WS-8157OAK-IT |
| Power Source | 2 AA alkaline batteries (not included) |
| Battery Life | Approximately 12 months |
| Display Type | LCD with backlight |
| Time Reception | Radio-controlled (WWVB, 60 kHz) |
| Time Format | 12 or 24 hour selectable |
| Date Display | Day of week, month, date, year |
| Indoor Temperature Range | 32°F to 140°F (0°C to 60°C) |
| Outdoor Temperature Range | -40°F to 140°F (-40°C to 60°C) |
| Temperature Units | °F or °C selectable |
| Alarm | Single alarm with snooze (5 minutes) |
| Alarm Sound | Beep tone |
| Outdoor Sensor | Wireless, 433 MHz, range up to 330 ft (100 m) open air |
| Dimensions (Clock) | 7.6 x 3.8 x 2.5 inches (19.3 x 9.7 x 6.4 cm) |
| Weight (Clock) | 0.44 lbs (200 g) |
| Material | ABS plastic |
| Mounting Options | Desktop stand or wall mountable |
| Included Items | Clock, outdoor sensor (TX141x series), manual |
| Warranty | 1 year limited |
Frequently Asked Questions - WS-8157OAK-IT LA CROSSE TECHNOLOGY
How do I set the time manually if the atomic signal fails?
Press and hold the SET button for 3 seconds until the time flashes. Use the + and - buttons to adjust. Press SET to confirm.
How to replace batteries in the clock and sensor?
For the clock, open the battery compartment on the back and insert 2 fresh AA alkaline batteries. For the sensor, slide open the compartment and insert 2 AA batteries. Observe correct polarity.
Why does the outdoor temperature show dashes?
The clock is not receiving the sensor signal. Ensure the sensor is within range (330 ft open air) and batteries are fresh. Press and hold the TX button to force reception.
How to change from Fahrenheit to Celsius?
Press the °F/°C button (or a combination) to toggle between units. Refer to manual for exact key if different.
Does this clock automatically adjust for Daylight Saving Time?
Yes, it is pre-programmed to adjust for DST on set dates. You can disable DST if needed by holding the DST button until the icon disappears.
How to set the alarm?
Press the ALARM button once to view alarm time. Hold ALARM for 3 seconds to enter setting mode, use +/- to adjust, then press ALARM to save.
What does the moon phase icon show?
The moon phase display shows the current lunar phase based on the date. It updates automatically.
How to clean the clock?
Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners.
The display is dim. Can I adjust brightness?
This model does not have adjustable brightness. The backlight is on for a few seconds when any button is pressed.
Can I use rechargeable batteries?
Alkaline batteries are recommended for best performance. Rechargeable batteries may work but may reduce battery life and affect timekeeping.
User questions about WS-8157OAK-IT LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual WS-8157OAK-IT - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS-8157OAK-IT by LA CROSSE TECHNOLOGY.
USER MANUAL WS-8157OAK-IT LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : WS-8157OAK-IT
Category : Clock