EUP11RS - Boiler Morco - Free user manual and instructions
Find the device manual for free EUP11RS Morco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Morco |
| Model | EUP11RS |
| Product Type | Gas Boiler |
| Power Output | 11 kW |
| Dimensions (H x W x D) | 400 x 300 x 200 mm |
| Weight | 15 kg |
| Power Supply | 230 V / 50 Hz |
| Gas Type | Natural Gas / LPG (convertible) |
| Ignition | Electronic |
| Control Type | Manual thermostat |
| Functions | Central heating and domestic hot water |
| Efficiency | 90% |
| Safety Features | Flame failure device, overheat protection |
| Installation | Wall-mounted, balanced flue |
| Venting | Room-sealed (balanced flue) |
| Water Connection | 15 mm compression fittings |
| Gas Connection | 15 mm compression fittings |
| Operating Pressure | 1 bar (cold), 2 bar (hot) |
| Seasonal Efficiency (SAP 2009) | Band D |
| Maintenance | Annual service recommended by qualified engineer |
| Spare Parts | Available through Morco distributors |
| Warranty | 2 years parts and labor |
| Certification | CE marked |
Frequently Asked Questions - EUP11RS Morco
What is the power output of the Morco EUP11RS boiler?
The Morco EUP11RS boiler has a power output of 11 kW, suitable for small to medium-sized homes.
What type of gas can the EUP11RS use?
It can run on Natural Gas or LPG after conversion. Conversion kit may be required.
How do I reset the boiler after a fault?
Press and hold the reset button on the control panel for 3 seconds. If the fault persists, consult the manual.
What should the water pressure be?
The recommended cold water pressure is 1 bar. If below 0.5 bar, repressurize using the filling loop.
How often should I service the boiler?
Annual servicing by a Gas Safe registered engineer is recommended to ensure safety and efficiency.
Why is the boiler making a banging noise?
Banging noises may indicate kettling due to limescale buildup. A system flush or descaling may be needed.
Can I install the boiler myself?
No, installation must be carried out by a qualified gas engineer to comply with building regulations.
What do error codes mean?
Common errors: E1 (ignition failure), E2 (overheat), E3 (flame loss). Refer to the manual for full list.
How do I bleed the radiators?
Use a radiator key to open the bleed valve until water escapes, then close. Check pressure after.
Where can I find spare parts?
Spare parts are available from Morco authorized dealers or online stockists. Use part numbers from the manual.
User questions about EUP11RS Morco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual EUP11RS - Morco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EUP11RS by Morco.
USER MANUAL EUP11RS Morco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Morco
Model : EUP11RS
Category : Boiler