LAM2707 - Basket Lamona - Free user manual and instructions
Find the device manual for free LAM2707 Lamona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cooker Hood |
| Brand | Lamona |
| Model | LAM2707 |
| Installation Type | Built-in / Under Cabinet |
| Dimensions (W x D x H) | 60 x 50 x 15 cm |
| Weight | 5.5 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 150 W |
| Maximum Extraction Rate | 450 m³/h |
| Number of Speeds | 3 |
| Lighting | 2 x 1.5 W LED |
| Control Type | Sliding Switch |
| Filter Type | Aluminum Grease Filter (washable) |
| Carbon Filter | Optional (sold separately) |
| Noise Level (max speed) | 65 dB |
| Ducting Diameter | 120 mm |
| Energy Efficiency Class | B |
| Annual Energy Consumption | 30 kWh/a |
| Safety Features | Overheat Protection |
| Spare Parts Available | Grease filter, carbon filter, LED bulb |
Frequently Asked Questions - LAM2707 Lamona
How to install the Lamona LAM2707 cooker hood?
Ensure the hood is installed at least 65 cm above electric hobs and 75 cm above gas hobs. Use the provided template to mark screw positions, drill holes, and secure the hood to the wall or cabinet. Connect the ducting (if in extraction mode) or install carbon filters for recirculation. Finally, connect to the mains.
How to clean the grease filter?
Remove the aluminum grease filter and wash it by hand with warm soapy water or in the dishwasher at low temperature. Ensure it is completely dry before reinstalling. Clean the filter every month for optimal performance.
How to replace the carbon filter?
If using recirculation mode, replace the carbon filter every 3-6 months. To replace, remove the grease filter, then slide the old carbon filter out and insert a new one. Reinstall the grease filter.
What type of bulb does the hood use?
The Lamona LAM2707 uses 2 x 1.5W LED bulbs. Ensure replacement bulbs have the same base and rating. Turn off the power before replacing.
Why is the hood not extracting properly?
Check if the grease filter is clogged. Also ensure the ducting is not blocked or kinked. If in recirculation mode, the carbon filter may be saturated. Clean or replace filters as needed.
How to switch between extraction and recirculation mode?
For extraction, connect the duct pipe to the chimney outlet and lead outside. For recirculation, install carbon filters above the grease filter and ensure the outlet is open. Follow the manual for specific steps.
Can the hood be used without the carbon filter?
Yes, but only if the hood is connected to an external duct (extraction mode). For recirculation mode, carbon filters are mandatory to remove odors.
How loud is the LAM2707 cooker hood?
At maximum speed, the noise level is approximately 65 dB, which is similar to a normal conversation. Lower speeds are quieter.
What is the warranty period for Lamona hoods?
Lamona typically offers a 2-year warranty. For specific terms, refer to your purchase receipt or contact the retailer.
How to adjust the fan speed?
Use the sliding switch on the hood. Slide to position 1 for low speed, position 2 for medium, and position 3 for high. Switch to 0 to turn off.
User questions about LAM2707 Lamona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual LAM2707 - Lamona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LAM2707 by Lamona.