Seven Batten 42 - Effect machine Elation - Free user manual and instructions
Find the device manual for free Seven Batten 42 Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Effect Batten |
| Model | Seven Batten 42 |
| Brand | Elation |
| Dimensions (L x W x H) | 42 x 4 x 6 inches (1067 x 102 x 152 mm) |
| Weight | 22 lbs (10 kg) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 350W max |
| Light Source | 42 x 10W RGBW LEDs |
| Beam Angle | 25 degrees |
| Control Protocol | DMX512, RDM |
| DMX Channels | 4, 8, or 12 selectable |
| Operating Modes | DMX, Master/Slave, Standalone, Sound-Active |
| Display | OLED with menu navigation |
| Cooling | Variable-speed fan |
| Mounting | Bracket with dual locking knobs |
| IP Rating | IP20 (indoor use only) |
| Maintenance | Clean with dry cloth; ensure vents unobstructed |
| Safety Features | Auto shutdown on overheat; safety cable attachment |
| Replaceable Parts | LED modules, power supply, fan |
| Repairability | Modular design; repairs by qualified technician |
| Included Accessories | Power cord, DMX cable, user manual |
| Certifications | CE, cETLus |
Frequently Asked Questions - Seven Batten 42 Elation
How do I connect the Seven Batten 42 to a DMX controller?
Use a standard 3-pin XLR DMX cable to connect the fixture's DMX IN to your controller's output. Set the DMX address via the OLED menu using the up/down buttons. Ensure proper termination on the last fixture.
What are the available DMX channel modes?
The fixture offers 4, 8, or 12 channel modes. Select the mode in the DMX settings menu. Refer to the user manual for channel assignments per mode.
Can I run the fixture in sound-active mode?
Yes, set the operation mode to Sound-Active via the menu. The fixture will react to ambient sound via its built-in microphone. Adjust sound sensitivity as needed.
How do I clean the LEDs and housing?
Disconnect power first. Use a soft, dry cloth to gently wipe the lens and housing. Avoid using solvents or abrasive cleaners. Keep ventilation slots clear of dust.
The fixture is overheating. What should I do?
Ensure proper ventilation around the fixture. Check that fans are spinning and not blocked. Reduce ambient temperature if necessary. The fixture will auto shutdown if overheating persists.
Can I replace the LEDs myself?
LED replacement should be performed by a qualified technician. The fixture uses modular LED boards that can be swapped, but improper handling may cause damage.
What power cord does it require?
The fixture uses a standard IEC C14 power inlet. A power cord with a compatible plug for your region is included. Ensure voltage matches: 100-240V AC, 50/60Hz.
How do I reset the fixture to factory defaults?
On the menu, navigate to 'Fixtures Settings' then select 'Factory Reset'. Confirm the reset. The fixture will reboot with default settings.
Is the fixture suitable for outdoor use?
No, the Seven Batten 42 is rated IP20 for indoor use only. Do not expose it to rain, moisture, or extreme temperatures.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in the product page. You can also request a translated version via email.
User questions about Seven Batten 42 Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Seven Batten 42 - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Seven Batten 42 by Elation.
USER MANUAL Seven Batten 42 Elation
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elation
Model : Seven Batten 42
Category : Effect machine