MTN6730-0002 - Uncategorized SCHNEIDER - Free user manual and instructions
Find the device manual for free MTN6730-0002 SCHNEIDER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Switch / Socket |
| Model | MTN6730-0002 |
| Brand | Schneider |
| Dimensions (H x W x D) | 86 x 86 x 38 mm |
| Weight | Approx. 120 g |
| Rated Voltage | 250 V AC |
| Rated Current | 10 A |
| Number of Gangs | 1-gang |
| Material | Polycarbonate (thermoplastic) |
| Color | White (standard) |
| Mounting Type | Flush-mounted (in-wall) |
| Protection Class | IP20 (indoor use) |
| Operating Temperature | -5 °C to +40 °C |
| Standards Compliance | EN 60669-1 |
| Installation Depth Required | ≥ 35 mm (standard flush box) |
| Main Functions | Single-pole switching; on/off control of lighting or other loads |
| Cleaning and Maintenance | Wipe with a dry soft cloth; do not use abrasive cleaners |
| Safety Features | Double insulation; screw terminals with captive screws |
| Spare Parts / Repairability | Replacement module available (sold separately); fixings included |
| Warranty | 2 years (subject to Schneider terms) |
Frequently Asked Questions - MTN6730-0002 SCHNEIDER
What is the rated voltage and current for the Schneider MTN6730-0002?
The rated voltage is 250 V AC and the rated current is 10 A, suitable for standard residential lighting and small appliances.
Can the MTN6730-0002 be used with LED lighting?
Yes, it is compatible with LED loads as long as the total load does not exceed the rated current. For specific LED drivers, ensure the inrush current is within limits.
How do I install the switch?
Installation should be performed by a qualified electrician. Ensure the power is off. Connect wires to the screw terminals: line to common, load to the other terminal. Then mount the switch into a flush box and snap on the cover frame.
What are the dimensions of the switch?
The overall dimensions are 86 x 86 mm (standard UK/EU size) with a depth of 38 mm. It requires a flush mounting box with a minimum depth of 35 mm.
Is the switch suitable for outdoor use?
No, the IP20 rating indicates it is only suitable for indoor use in dry locations. For outdoor use, you need an enclosure with higher IP rating.
What tools are needed for installation?
You will need a screwdriver (flat or Phillips depending on terminal), voltage tester, wire stripper, and possibly a spirit level for alignment.
Can I connect multiple switches together?
This model is a single-gang switch. For multi-gang configurations, you need a multi-gang frame and corresponding modules (e.g., MTN6730-0002 for each gang). Wiring must comply with local codes.
How do I clean the switch?
Clean with a slightly damp, soft cloth. Do not use any solvents, abrasive cleaners, or immerse in water. Ensure the switch is disconnected from power before cleaning.
What should I do if the switch stops working?
Check the circuit breaker first. If power is present, inspect wiring connections. If the mechanism is faulty, the module can be replaced. Contact Schneider customer service for spare parts under warranty.
Is there a manual available for the MTN6730-0002?
Yes, the user manual can be downloaded for free from notice-facile.com or the Schneider website. It includes detailed installation and usage instructions.
User questions about MTN6730-0002 SCHNEIDER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MTN6730-0002 - SCHNEIDER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MTN6730-0002 by SCHNEIDER.
USER MANUAL MTN6730-0002 SCHNEIDER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHNEIDER
Model : MTN6730-0002
Category : Uncategorized