A350 - 3D Printer Snapmaker - Free user manual and instructions
Find the device manual for free A350 Snapmaker in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3D Printer |
| Brand | Snapmaker |
| Model | A350 |
| Build Volume | 320 x 350 x 330 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Print Bed Type | Heated, removable |
| Max Print Temperature | 300 °C (nozzle) |
| Max Bed Temperature | 100 °C |
| Layer Resolution | 0.05 - 0.3 mm |
| Print Speed | Up to 100 mm/s |
| Supported Filaments | PLA, ABS, PETG, TPU, Nylon, etc. |
| Connectivity | USB, Wi-Fi, Ethernet |
| Control | Touchscreen, computer software |
| Frame Material | Aluminum alloy |
| Dimensions | 500 x 500 x 700 mm |
| Weight | Approx. 30 kg |
| Power Supply | 24V DC, 350W |
| Auto Leveling | Yes |
| Filament Detection | Yes |
| Power Loss Recovery | Yes |
| Maintenance | Lubricate linear rails, clean nozzle periodically |
| Safety Features | Overheating protection, power loss recovery |
| Spare Parts Availability | Nozzle kit, build plate, hotend, etc. |
| Repairability | Modular design, user-replaceable parts |
Frequently Asked Questions - A350 Snapmaker
How do I level the print bed on the Snapmaker A350?
The A350 features auto bed leveling. Go to the touchscreen menu, select 'Leveling', and the printer will automatically probe multiple points. Fine-tune manually if needed.
What filament types can I use with the A350?
The A350 supports 1.75mm filament such as PLA, ABS, PETG, TPU, and Nylon. Ensure the nozzle temperature matches the filament requirements.
How do I connect the A350 to my computer?
You can connect via USB cable, Wi-Fi, or Ethernet. Install Snapmaker Luban or Cura for slicing and printing.
Why is my print not sticking to the bed?
Check the bed leveling and ensure the bed temperature is adequate (e.g., 60°C for PLA). Clean the build plate with isopropyl alcohol and apply a thin layer of glue stick if needed.
How do I change the nozzle on the A350?
Heat the nozzle to 200°C, then use the included wrench to loosen the nozzle. Allow it to cool before removing. Install the new nozzle and tighten when hot.
What should I do if the printer stops mid-print?
The A350 has power loss recovery and filament detection. If power fails, restart the printer and it will resume from the last saved point. If filament runs out, pause and insert new filament.
How do I update the firmware?
Download the latest firmware from Snapmaker's website or via Luban. Connect the printer via USB and use the Luban firmware update tool. Follow on-screen instructions.
Can I print with flexible filaments?
Yes, the A350 can print TPU and other flexible materials. Use a slower print speed and ensure the extruder tension is properly adjusted.
What maintenance does the A350 require?
Regularly lubricate the linear rails with grease, clean the nozzle and bed, and check belt tension. Refer to the manual for detailed intervals.
Where can I find spare parts?
Spare parts like nozzles, build plates, and hotend assemblies are available on Snapmaker's official store and authorized retailers.
User questions about A350 Snapmaker
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Printer in PDF format for free! Find your manual A350 - Snapmaker and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A350 by Snapmaker.
USER MANUAL A350 Snapmaker
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Snapmaker
Model : A350
Category : 3D Printer