Bento 6 DS - Uncategorized Fredenstein - Free user manual and instructions
Find the device manual for free Bento 6 DS Fredenstein in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Mixer / Interface |
| Brand | Fredenstein |
| Model | Bento 6 DS |
| Dimensions (W x D x H) | 19 x 8 x 1.75 inches (483 x 203 x 44 mm) |
| Weight | 2.5 kg (5.5 lbs) |
| Power Supply | 12V DC, 1A (external adapter) |
| Number of Channels | 6 |
| Input Connectors | 6x XLR/TRS combo jacks |
| Output Connectors | 2x XLR main outs, 2x TRS monitor outs, 1x TRS headphones |
| Phantom Power | +48V, individually switchable per channel |
| Frequency Response | 20 Hz - 20 kHz, ±1 dB |
| Total Harmonic Distortion | < 0.01% at 1 kHz |
| Signal-to-Noise Ratio | ≥ 110 dB (A-weighted) |
| Equalization | 3-band EQ (High, Mid, Low) per channel |
| Built-in Effects | Reverb, delay, chorus (selectable per channel) |
| USB Audio Interface | USB 2.0, 2-in/2-out, 24-bit/96 kHz |
| Rackmountable | 19" rackmount, 1U |
| Included Accessories | Power adapter, USB cable, rackmount ears |
| Maintenance & Cleaning | Use dry cloth; avoid liquids; clean connectors with contact cleaner |
| Safety | Do not expose to moisture; use only supplied power adapter; disconnect when not in use |
| Spare Parts/Repairability | Contact Fredenstein support for parts; serviceable by qualified technician |
Frequently Asked Questions - Bento 6 DS Fredenstein
How do I connect a microphone to the Bento 6 DS?
Connect your microphone to any XLR/TRS combo input. Ensure phantom power is enabled if using a condenser mic by pressing the +48V switch for that channel.
Can I use the Bento 6 DS as a USB audio interface?
Yes, the Bento 6 DS has a USB 2.0 port that allows 2-in/2-out audio streaming at up to 24-bit/96 kHz. Connect it to your computer and select it as the audio device.
How do I apply reverb to a specific channel?
Each channel has a dedicated Effects knob. Turn it clockwise to blend in the built-in reverb, delay, or chorus effect selected via the global Effects Select switch.
Why is there no sound from the main outputs?
Check the Main Volume knob, ensure the channel faders are up, and verify that the mute buttons are not engaged. Also confirm that the main outputs are connected properly.
What power supply does the Bento 6 DS require?
It requires a 12V DC, 1A power supply with a center-positive barrel connector. Use only the included adapter to avoid damage.
How do I record audio from the mixer to my computer?
Connect the mixer via USB. On your computer, select the Fredenstein Bento 6 DS as the input device. The main mix is sent to the USB output by default.
Can I use the Bento 6 DS with an iPad?
Yes, if you have a USB-C adapter (or Lightning adapter) that supports USB audio class compliance. The mixer is class-compliant and does not require drivers.
How do I clean the mixer?
Use a soft, dry cloth to wipe the surface. For connectors, use a contact cleaner spray and a non-abrasive brush. Avoid liquids inside the unit.
What is the warranty period for the Bento 6 DS?
Fredenstein offers a 2-year limited warranty from the date of purchase. Keep your receipt for service.
How do I reset the mixer to factory settings?
There is no user-accessible reset. All settings return to default on power cycle except stored presets. To clear presets, consult the manual or contact support.
User questions about Bento 6 DS Fredenstein
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Bento 6 DS - Fredenstein and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bento 6 DS by Fredenstein.
USER MANUAL Bento 6 DS Fredenstein
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fredenstein
Model : Bento 6 DS
Category : Uncategorized