Super Pulsar - Uncategorized Electro Harmonix - Free user manual and instructions
Find the device manual for free Super Pulsar Electro Harmonix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Tremolo Pedal |
| Brand | Electro Harmonix |
| Model | Super Pulsar |
| Dimensions | 4.5 x 4.5 x 2.7 inches (approx.) |
| Weight | 1.2 lbs (approx.) |
| Power Supply | 9V DC center negative, 200mA minimum |
| Battery | 9V (unsupported due to high current draw, use adapter) |
| Waveform Shapes | Triangle, Sine, Square, Sawtooth, Random, Envelope Follower |
| Controls | Rate, Depth, Shape, Level, Tap Tempo, Expression Pedal Input |
| Modes | Mono, Stereo, Harmonic Tremolo, Panner, Volume Swell |
| Audio Input | 1/4" TS (Mono), 2 x 1/4" TS (Stereo) |
| Audio Output | 1/4" TS (Mono), 2 x 1/4" TS (Stereo) |
| True Bypass | Yes |
| LED Indicators | Rate and Bypass LEDs |
| Construction | Aluminum chassis |
| Maintenance | Wipe with dry cloth; avoid moisture and solvents |
| Safety Warnings | Use only supplied or recommended power supply; avoid exposure to extreme temperatures |
| Spare Parts | Contact Electro Harmonix for authorized service |
| Repairability | Repair by qualified technician recommended; no user-serviceable parts inside |
Frequently Asked Questions - Super Pulsar Electro Harmonix
How do I power the Super Pulsar?
Use a 9V DC center negative power supply with at least 200mA. A battery is not recommended due to high current draw.
Can I use an expression pedal with the Super Pulsar?
Yes, connect a standard expression pedal to the EXP jack to control rate or depth, depending on the internal switch setting.
What is the difference between Harmonic and Standard tremolo?
Harmonic tremolo splits the signal into low and high frequencies and modulates them out of phase, creating a richer, more complex sound. Standard tremolo modulates the entire signal in phase.
How do I set up stereo operation?
Connect your guitar to the left input, and use both output jacks (left and right) to feed two amplifiers or a stereo mixer. Ensure your patch cables are mono TS.
The LED is flashing but no sound comes out. What should I do?
Check that the pedal is in bypass mode? The LED indicates rate when engaged. If bypassed, the LED is off. Check cables and power supply.
Can I use the Super Pulsar with a bass guitar?
Yes, the Super Pulsar works with bass. Its frequency response is suitable for low frequencies, and the envelope follower mode can create interesting effects.
How do I clean and maintain this pedal?
Wipe the exterior with a soft dry cloth. Do not use solvents or abrasive cleaners. Avoid moisture. For knob issues, contact a technician.
What is true bypass? Does the Super Pulsar have it?
True bypass means the pedal is completely disconnected from your signal when off, preserving your original tone. The Super Pulsar features true bypass.
The rate seems too fast/slow. Can I adjust the range?
The rate knob controls speed over a wide range. For extreme ranges, use the tap tempo feature to set exact BPM or an expression pedal for on-the-fly changes.
Is the Super Pulsar compatible with multi-effects units?
Yes, it can be placed in an effects loop of a multi-effects unit. However, be aware of impedance matching; it works best after distortion/overdrive pedals.
User questions about Super Pulsar Electro Harmonix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Super Pulsar - Electro Harmonix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Super Pulsar by Electro Harmonix.
USER MANUAL Super Pulsar Electro Harmonix
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Electro Harmonix
Model : Super Pulsar
Category : Uncategorized