TES231 - Earphones LIVOO - Free user manual and instructions
Find the device manual for free TES231 LIVOO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth In-Ear Headphones |
| Model | TES231 |
| Brand | Livoo |
| Wireless Connectivity | Bluetooth 5.0 |
| Driver Size | 10 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Battery Life (Earbuds) | 5 hours |
| Battery Life (with Charging Case) | 20 hours |
| Charging Time | 2 hours |
| Charging Port | Micro USB |
| Dimensions (Earbuds) | 40 x 20 x 25 mm (each) |
| Weight (Earbuds) | 5 g (each) |
| Weight (Charging Case) | 40 g |
| Water Resistance | IPX4 |
| Microphone | Built-in, noise reduction |
| Controls | Touch sensors for playback, volume, calls |
| Compatibility | iOS and Android devices |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Safety | Keep away from children; do not use while driving |
| Spare Parts and Repairability | No user-serviceable parts; contact Livoo support |
| Warranty | 2 years |
Frequently Asked Questions - TES231 LIVOO
How do I pair the earphones with my phone?
Ensure the earphones are charged. Remove them from the charging case; they will enter pairing mode automatically. On your phone, enable Bluetooth and select 'TES231' from the list.
What is the battery life of the earphones?
The earbuds provide up to 5 hours of playback on a single charge. With the charging case, you get an additional 15 hours for a total of 20 hours.
How do I charge the earphones?
Place the earbuds back into the charging case. Connect the charging case to a USB power source using the included Micro USB cable. The case's LED will indicate charging status.
Are the earphones water resistant?
Yes, they have an IPX4 rating, meaning they are splash-proof and can withstand light rain or sweat. Do not submerge them in water.
Can I use only one earbud at a time?
Yes, you can use either the left or right earbud independently. Just remove one from the case and it will connect automatically.
How do I reset the earphones?
Place both earbuds in the charging case. Press and hold the touch sensors on both earbuds for about 10 seconds until the LED flashes red and white. Remove them and they will enter pairing mode.
Why is the sound cutting out or pairing unstable?
Ensure there are no obstacles between the earphones and your device. Keep the distance within 10 meters (33 feet). Also, make sure your device's Bluetooth is fully compatible and updated.
Can I answer calls with these earphones?
Yes, they have a built-in microphone with noise reduction. Tap the touch sensor to answer or end a call.
What should I do if one earbud is not working?
First, place both earbuds in the case and ensure they are charging. Then remove them together to resync. If the issue persists, perform a reset as described above.
Are replacement ear tips available?
The earphones come with three sizes of silicone ear tips. If you need replacements, contact Livoo customer support or check their website for spare parts.
User questions about TES231 LIVOO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Earphones in PDF format for free! Find your manual TES231 - LIVOO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TES231 by LIVOO.
USER MANUAL TES231 LIVOO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LIVOO
Model : TES231
Category : Earphones