CAR110W - Receiver JENSEN - Free user manual and instructions
Find the device manual for free CAR110W JENSEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Stereo Receiver |
| Brand | Jensen |
| Model | CAR110W |
| Dimensions (W x H x D) | 7.0 x 2.0 x 6.0 inches (178 x 50 x 152 mm) |
| Weight | 1.5 lbs (0.68 kg) |
| Power Supply | 12V DC (negative ground) |
| Maximum Power Output | 4 x 50 watts |
| RMS Power Output | 4 x 22 watts |
| Radio Tuner | FM/AM with 30 presets |
| Bluetooth | Yes, for hands-free calling and audio streaming |
| USB Port | Front USB for music playback from USB drives |
| AUX Input | 3.5mm front auxiliary input |
| Audio Features | Equalizer with presets, bass/treble control |
| Display | LCD with white backlight |
| Remote Control | Included |
| Detachable Faceplate | Yes, for theft prevention |
| Compatibility | ISO DIN mounting, fits most vehicles |
| Warranty | 1 year limited |
Frequently Asked Questions - CAR110W JENSEN
How do I install the Jensen CAR110W receiver in my car?
Installation requires a ISO DIN mounting kit and wiring harness. Connect power (12V constant and switched), ground, and speakers according to the wiring diagram. Use the included trim ring and screws. Refer to the manual for detailed steps.
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone. On the receiver, press the BT button to enter pairing mode. Select 'JENSEN CAR110W' from your phone's Bluetooth list. Enter PIN '0000' if prompted. Once paired, audio streaming and hands-free calling are available.
Why is there no sound from the speakers?
Check speaker wire connections and ensure the mute function is off. Verify that the volume is not at zero. Also, confirm the correct source (FM, USB, etc.) is selected and that the internal amplifier is not in protection mode due to a short circuit.
How do I reset the receiver to factory defaults?
Press and hold the Reset button (small pinhole on the front panel) with a paperclip for 3 seconds. This will clear all settings and presets.
Can I control the receiver with a remote?
Yes, the receiver comes with a remote control. It allows you to adjust volume, change sources, and navigate menu functions. Point the remote at the receiver's IR sensor.
What audio formats are supported via USB?
The USB port supports MP3 and WMA files. Ensure the USB drive is formatted as FAT32. Files should be organized in folders if many; the receiver can navigate folders.
How do I set radio presets?
Tune to the desired station using the Tuning knob or seek buttons. Press and hold one of the preset buttons (1-6) until the display flashes, confirming the station is saved. Repeat for up to 30 presets.
Is the faceplate detachable?
Yes, the faceplate is detachable for security. Press the release button on the bottom left and pull the faceplate off. Store it in the provided case when not in use.
What is the power output of the built-in amplifier?
The receiver has a maximum output of 4 x 50 watts and an RMS output of 4 x 22 watts. It is designed for standard car speakers; for higher power, use external amplifiers.
How do I clean the receiver?
Use a soft, dry cloth to wipe the exterior. Avoid liquids, abrasives, or solvents. For the faceplate, gently clean with a microfiber cloth. Do not use compressed air near the screen.
User questions about CAR110W JENSEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CAR110W - JENSEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CAR110W by JENSEN.
USER MANUAL CAR110W JENSEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JENSEN
Model : CAR110W
Category : Receiver