X-Station 61 - Uncategorized NOVATION - Free user manual and instructions
Find the device manual for free X-Station 61 NOVATION in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 61-key Synthesizer / MIDI Controller |
| Keys | 61 velocity-sensitive keys with aftertouch |
| Sound Engine | Analog modeling with over 400 presets |
| Polyphony | 8-voice polyphonic, 8-part multi-timbral |
| Effects | Built-in reverb, chorus, delay, and EQ |
| Controllers | 8 knobs, 8 faders, 16 velocity-sensitive pads, X-Y touchpad |
| Connectivity | USB (MIDI + audio), MIDI I/O, audio in/out, sustain pedal, expression pedal |
| Audio Interface | 2 inputs, 2 outputs, 24-bit/48kHz |
| Power Supply | 12V DC 1A (included) or USB bus power (limited) |
| Dimensions | 1000 x 300 x 100 mm (39.4 x 11.8 x 3.9 in) |
| Weight | 7.2 kg (15.9 lbs) |
| Display | 2-line backlit LCD |
| Arpeggiator | Built-in arpeggiator with user patterns |
| Sequencer | Pattern-based sequencer (16 slots) |
| Compatibility | Windows, macOS, iOS (via Camera Connection Kit) |
| Maintenance | Clean with a soft, dry cloth; avoid liquids and solvents |
| Safety | Keep away from moisture, heat sources, and direct sunlight |
| Spare Parts & Repairability | Not user-serviceable; contact Novation support for repairs |
| General Information | Released in 2005; includes USB cable, power adapter, and software bundle |
Frequently Asked Questions - X-Station 61 NOVATION
How do I factory reset the Novation X-Station 61?
Hold down the Global button while powering on, then select 'Factory Reset' from the menu. Confirm by pressing Enter.
How can I connect the X-Station 61 to my computer?
Use a standard USB cable to connect the USB port on the back of the X-Station to your computer. Install the Novation USB driver if needed (Windows).
How do I assign a MIDI CC to a knob or fader?
Press the Learn button, move the desired knob/fader, then move the controller on your software. The X-Station will automatically map the MIDI CC.
Can I use the X-Station 61 as an audio interface?
Yes. Connect the audio outputs to your speakers or headphones. Select X-Station as the audio device in your DAW settings. The built-in audio interface supports 2-input/2-output at 24-bit/48kHz.
How do I update the firmware on the X-Station 61?
Download the latest firmware from the Novation website. Connect the X-Station via USB, run the updater, and follow the on-screen instructions. Do not power off during update.
How can I layer multiple sounds on the X-Station?
Enable Multi Mode by pressing Multi. Then, assign different patches to parts and set them to the same MIDI channel. Adjust volume levels as desired.
How do I record automation from the knobs/faders?
In your DAW, set the tracks to record MIDI CC. Move the knob/fader during playback; the movements will be recorded as automation data.
My X-Station is not producing any sound. What should I check?
Check that the Volume is up and not muted. Ensure the Local Control is on (Global menu). Verify audio cables and that the amp/speakers are powered. If using via USB, check audio settings.
How do I use the X-Y touchpad?
The X-Y pad sends MIDI CC 16 and 17 by default. Press the pad and drag your finger to control two parameters simultaneously. You can reassign the CCs in the Global settings.
How can I change presets quickly?
Use the Patch Up/Down buttons to scroll through presets. Alternatively, enter the patch number directly using the numeric keypad and press Enter.
User questions about X-Station 61 NOVATION
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual X-Station 61 - NOVATION and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X-Station 61 by NOVATION.