WNR614 - Router NETGEAR - Free user manual and instructions
Find the device manual for free WNR614 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | Netgear |
| Model | WNR614 |
| Wi-Fi Standard | 802.11b/g/n |
| Maximum Wireless Speed | 300 Mbps (2.4 GHz) |
| Number of LAN Ports | 4 x 10/100 Mbps |
| Number of WAN Ports | 1 x 10/100 Mbps |
| Security Features | WEP, WPA, WPA2-PSK, WPS (Push Button) |
| Dimensions (W x D x H) | 177 x 122 x 32 mm |
| Weight | 0.32 kg |
| Power Supply | 12V DC, 1A |
| LED Indicators | Power, Internet, LAN (4) |
| Antenna Type | 2 external fixed antennas |
| Temperature Operating Range | 0°C to 40°C |
| Humidity Operating Range | 10% to 90% (non-condensing) |
| Default IP Address | 192.168.1.1 |
| Default Admin Credentials | admin / password |
| Frequency Band | 2.4 GHz |
| Quality of Service (QoS) | WMM (Wi-Fi Multimedia) |
| Routing Protocol | Static and dynamic (RIP v1/v2) |
| NAT | Network Address Translation supported |
| DHCP | Server and client |
| VPN Pass-Through | PPTP, IPSec, L2TP |
| Parental Controls | OpenDNS-based |
Frequently Asked Questions - WNR614 NETGEAR
How to reset the Netgear WNR614 to factory defaults?
Press and hold the Reset button on the back of the router with a paperclip for about 10 seconds until the power LED blinks. Release and wait for the router to reboot.
What is the default IP address of the WNR614?
The default IP is 192.168.1.1. Enter this in your browser to access the router's web interface.
How do I change the Wi-Fi password on my Netgear WNR614?
Log in to the router interface at 192.168.1.1, go to Wireless Settings, and change the passphrase. Save settings and reconnect devices.
Can I use the WNR614 as a wireless repeater?
Yes, the WNR614 supports WDS (Wireless Distribution System) bridging. Configure it in the Advanced Wireless Settings to connect to another router.
How to update the firmware on the Netgear WNR614?
Download the latest firmware from Netgear's support site. Go to Maintenance > Router Upgrade in the router settings, select the file, and upgrade. Do not power off.
Why is my WNR614 not connecting to the internet?
Check the WAN cable connection and ensure the modem is online. Log in to the router and verify the Internet Setup (PPPoE, Dynamic IP, etc.). Reboot both devices.
How to enable guest network on WNR614?
Log in, go to Guest Network settings, enable it, set a separate SSID and password. Guests will have internet access only.
What security modes does the WNR614 support?
Supports WEP, WPA-PSK, WPA2-PSK, and WPS. For best security, use WPA2-PSK with AES encryption.
Can I connect a USB device to the WNR614?
No, the WNR614 does not have a USB port. It only has Ethernet ports and a power jack.
How to block a specific device from the network?
Log in, go to Advanced > MAC Filtering, add the device's MAC address, and set to deny. Alternatively, use Access Control in the router settings.
User questions about WNR614 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual WNR614 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WNR614 by NETGEAR.
USER MANUAL WNR614 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : WNR614
Category : Router