SM-L300 - Printer Star Micronics - Free user manual and instructions
Find the device manual for free SM-L300 Star Micronics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermal Receipt/Label Printer |
| Brand | Star Micronics |
| Model | SM-L300 |
| Dimensions (W x D x H) | Approx. 147 x 199 x 147 mm |
| Weight | Approx. 1.5 kg |
| Power Supply | AC adapter (24V DC, 2.5A) |
| Print Method | Direct Thermal |
| Print Speed | Up to 300 mm/s |
| Resolution | 203 dpi (8 dots/mm) |
| Paper Width | Up to 80 mm |
| Paper Roll Diameter | Up to 83 mm |
| Interface | USB, Ethernet, Serial (optional) |
| Supported Languages | Multiple (ESC/POS compatible) |
| Functions | Receipt printing, label printing, barcode printing |
| Cleaning | Clean print head and platen roller with isopropyl alcohol |
| Safety | Overheat protection, auto shutdown |
| Spare Parts | Print head, platen roller, power adapter |
| Repairability | Modular design, user-replaceable print head |
| Operating Temperature | 5°C to 45°C |
Frequently Asked Questions - SM-L300 Star Micronics
How do I connect the SM-L300 printer to my computer?
Connect the printer using a USB cable or Ethernet to your computer. Install the drivers from the Star Micronics website or included CD. Ensure the printer is powered on.
What type of paper does the SM-L300 use?
It uses thermal paper rolls with a maximum width of 80 mm and a diameter up to 83 mm. Avoid using paper with chemical coatings.
How do I load paper into the printer?
Open the cover, place the paper roll so that it unrolls from the bottom, feed the paper into the slot until it emerges, close the cover. The printer may auto-feed.
How do I clean the print head?
Turn off the printer, open the cover, and gently clean the print head with a cotton swab moistened with isopropyl alcohol. Avoid abrasive materials.
The printer is not printing. What should I check?
Verify the printer is powered on and connected. Check that the paper is loaded correctly and the cover is closed. Ensure the driver is installed and the correct printer is selected. If the light is flashing, it may indicate an error.
Can I print labels on the SM-L300?
Yes, the SM-L300 supports label printing with appropriate software. Use thermal label stock and configure the paper size in the driver.
How do I set up the printer on a network?
Connect the Ethernet cable and assign a static IP or use DHCP. Install the printer via the network IP address using the Star Micronics utility software.
What is the warranty period for the SM-L300?
The standard warranty is 2 years for parts and labor. Extended warranties may be available through local resellers.
How do I update the firmware?
Download the latest firmware from the Star Micronics support page. Connect the printer via USB and run the firmware update tool. Do not power off during update.
The printer prints faint or smudged images. What is wrong?
Clean the print head as described. Ensure you are using high-quality thermal paper. If the problem persists, the print head may need replacement.
User questions about SM-L300 Star Micronics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual SM-L300 - Star Micronics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SM-L300 by Star Micronics.
USER MANUAL SM-L300 Star Micronics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Star Micronics
Model : SM-L300
Category : Printer