PL460-EK - Uncategorized Microchip - Free user manual and instructions
Find the device manual for free PL460-EK Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Evaluation Kit |
| Brand | Microchip |
| Model | PL460-EK |
| Category | Power Line Communication (PLC) Development Board |
| Dimensions | 100 mm x 80 mm x 20 mm |
| Weight | 120 g |
| Power Supply | 5 V DC via USB or external 3.3 V |
| Main Component | PL460 Narrowband PLC Modem |
| Communication Interfaces | SPI, UART, GPIO |
| Protocol Support | PRIME, G3-PLC, IEEE 1901.2 |
| Operating Temperature | -40 °C to +85 °C |
| Storage Temperature | -55 °C to +125 °C |
| Relative Humidity | 5% to 95% non-condensing |
| Software Support | MPLAB X IDE, PL460 SDK, Example Codes |
| Key Features | Low power, high integration, configurable tone map |
| Protection | ESD protection, overcurrent protection on USB |
| Certification | CE, FCC, UKCA |
| Warranty | 1 year limited |
| Country of Origin | China |
| Package Contents | PL460-EK board, USB cable, antenna (optional) |
| Maintenance | Keep dry, clean with soft cloth, avoid liquids |
| Repairability | Not user-serviceable; contact Microchip support |
Frequently Asked Questions - PL460-EK Microchip
How do I power the PL460-EK board?
The board can be powered via the USB connector (5V) or by applying 3.3V to the appropriate pin. Ensure the power source is stable and within specifications.
What software do I need to start developing with the PL460-EK?
You need MPLAB X IDE and the PL460 SDK which includes drivers, example projects, and documentation. Download from Microchip's website.
Can I use the PL460-EK with Arduino?
Yes, you can interface the PL460-EK with an Arduino using SPI or UART. Refer to the application notes for wiring and code examples.
What is the maximum communication range?
Range depends on power line conditions, but typically up to several kilometers over low-voltage lines. Use repeaters for longer distances.
How do I update the firmware on the PL460-EK?
Firmware updates are done via the SPI interface using the PL460 Bootloader tool provided in the SDK. Follow the instructions in the user manual.
What is the default baud rate for UART communication?
The default UART baud rate is 115200 bps. You can change it in the firmware settings.
Does the PL460-EK support both PRIME and G3-PLC?
Yes, the PL460 modem is configurable for PRIME, G3-PLC, and IEEE 1901.2 standards. Select the protocol in the software.
How do I connect the PL460-EK to a power line?
Use the onboard antenna connector for capacitive coupling, or directly connect the line interface pins to the power line via a coupling circuit. Refer to the hardware manual.
What indicators are on the board?
There are LEDs for power (green), TX/RX activity (yellow/red), and a general-purpose LED (blue) controllable by the user.
Is the PL460-EK compatible with 3.3V logic?
Yes, all I/O pins are 3.3V tolerant. Do not apply voltages above 3.6V to avoid damage.
User questions about PL460-EK Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PL460-EK - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PL460-EK by Microchip.
USER MANUAL PL460-EK Microchip
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Microchip
Model : PL460-EK
Category : Uncategorized