AVN-CU4-DANTE - Processor Sonifex - Free user manual and instructions
Find the device manual for free AVN-CU4-DANTE Sonifex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dante Audio Processor |
| Brand | Sonifex |
| Model | AVN-CU4-DANTE |
| Dimensions (W x D x H) | 483 mm x 200 mm x 44 mm (1U) |
| Weight | 2.5 kg |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Audio Channels | 4 channels (balanced line level) |
| Network Interface | Dante IP audio over 1 Gb Ethernet |
| Sample Rate | 48 kHz, 24-bit |
| Latency | < 1 ms (configurable) |
| GPIO | 8 configurable I/Os |
| Controls | Front panel buttons, web interface |
| Operating Temperature | 0°C to 40°C |
| Humidity | 20% to 80% non-condensing |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety | Do not expose to rain or moisture |
| Spare Parts | Contact Sonifex support for replacements |
| Repairability | Repair by qualified personnel only |
| Certifications | CE, RoHS |
| Included Accessories | Rack ears, power supply, quick start guide |
Frequently Asked Questions - AVN-CU4-DANTE Sonifex
How do I connect the AVN-CU4-DANTE to my network?
Connect the device to your network switch using a standard Ethernet cable. Ensure the switch supports PoE if not using external power. The device will automatically obtain an IP address via DHCP.
What software is needed to configure the processor?
Use Dante Controller for audio routing and Sonifex AVN Manager (web interface) for device settings like GPIO and naming.
Can I use the device without PoE?
Yes, the unit can be powered via the 12V DC input if your network switch does not support PoE. Use the supplied power supply.
How many audio channels does it support?
The AVN-CU4-DANTE provides 4 balanced analog audio channels, which can be routed anywhere on the Dante network.
What is the latency of the device?
Typical Dante latency is less than 1 millisecond at 48 kHz sample rate. This can be adjusted via Dante Controller.
How do I perform a factory reset?
Press and hold the reset button on the rear panel for 10 seconds until the front LED blinks rapidly. This will reset IP settings to default.
Can I use balanced or unbalanced audio?
The inputs/outputs are electronically balanced. Use balanced TRS or XLR connections for optimal performance. Unbalanced use is possible but may reduce signal quality.
Is the device rack-mountable?
Yes, it has a 1U rack-mount design with included rack ears. Ensure adequate ventilation in the rack.
What does the LED indicator mean?
Solid green: power on and network connected; blinking green: network activity; red: fault or no Dante sync. See manual for details.
Where can I find the latest firmware?
Download the latest firmware from the Sonifex website support section. Use the web interface to upload and install.
User questions about AVN-CU4-DANTE Sonifex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual AVN-CU4-DANTE - Sonifex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVN-CU4-DANTE by Sonifex.
USER MANUAL AVN-CU4-DANTE Sonifex
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sonifex
Model : AVN-CU4-DANTE
Category : Processor