StudioTracker - Turntable MoFi - Free user manual and instructions
Find the device manual for free StudioTracker MoFi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | High-Fidelity Turntable |
| Model | StudioTracker |
| Brand | Mobile Fidelity (MoFi) |
| Drive System | Belt Drive |
| Speeds | 33 1/3, 45 RPM |
| Platter Material | Delrin with Aluminum Core |
| Tonearm | Ultra Low-Friction Gimbal Bearing |
| Cartridge | Pre-installed Moving Coil (MC) or Moving Magnet (MM) optional |
| Dimensions (W x D x H) | 17.5 x 13.5 x 5.5 inches |
| Weight | 25 lbs (11.3 kg) |
| Power Supply | External AC Adapter (15V DC, 1A) |
| Power Consumption | 5W typical |
| Main Features | Isolation feet, speed control, damped platter |
| Connectivity | RCA Phono Output (with ground wire) |
| Cleaning | Use anti-static brush and stylus cleaner; wipe platter with damp cloth |
| Safety | Unplug during cleaning; keep away from moisture |
| Spare Parts | Replaceable stylus, belt, and feet available from MoFi |
| Warranty | 2 years limited |
Frequently Asked Questions - StudioTracker MoFi
How do I set up the StudioTracker turntable?
Place the turntable on a level, stable surface. Install the platter and belt, then mount the counterweight and set tracking force. Connect the phono cables to your preamp or receiver, and ground the wire if needed.
What stylus force should I use?
The recommended tracking force is between 1.8 and 2.2 grams for most cartridges. Adjust the counterweight accordingly using a stylus scale for accuracy.
How do I change the speed from 33 to 45 RPM?
Use the speed selector switch located on the base of the turntable. For 45 RPM, the switch to the up position; for 33, down.
Can I use a moving magnet (MM) cartridge with this turntable?
Yes, the tonearm is compatible with both MM and MC cartridges. Ensure the phono preamp has the correct input impedance and gain settings.
How do I clean the stylus?
Use a specialized stylus brush or gel cleaner. Gently brush from back to front to remove dust. Avoid using alcohol or solvents.
What type of lubrication does the motor require?
The motor is sealed and does not require user lubrication. If you notice unusual noise, contact MoFi support.
How often should I replace the belt?
Depending on usage, every 2-3 years. Signs of wear include speed inconsistency or visible cracks. Replacement belts are available from MoFi.
Why is there a humming noise from the speakers?
Ensure the ground wire is connected to your preamp's ground terminal. Also, check that the turntable is not near sources of electromagnetic interference like transformers or power strips.
Is the StudioTracker a belt-drive or direct-drive turntable?
It is a belt-drive turntable, which provides lower noise and vibration, leading to better sound quality.
What is the warranty period for the StudioTracker?
MoFi offers a 2-year limited warranty against defects in materials and workmanship. Keep your proof of purchase.
User questions about StudioTracker MoFi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual StudioTracker - MoFi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. StudioTracker by MoFi.
USER MANUAL StudioTracker MoFi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MoFi
Model : StudioTracker
Category : Turntable