5PX HEX Pearl - Effect machine Adj - Free user manual and instructions
Find the device manual for free 5PX HEX Pearl Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Effect Light |
| Brand | Adj (American DJ) |
| Model | 5PX HEX Pearl |
| Light Source | 5 x 6W HEX LEDs (RGBAW+UV) |
| Color Mixing | RGB, Amber, White, UV |
| Beam Angle | 25 degrees |
| DMX Channels | 6, 7, or 11 selectable |
| Control Modes | DMX, Master/Slave, Sound Active, Auto |
| Power Consumption | 30W max |
| Input Voltage | AC 100-240V, 50/60Hz |
| Power Connection | IEC power cord, daisy chain up to 10 units |
| Dimensions (L x W x H) | 9.06 x 8.66 x 10.63 in (23 x 22 x 27 cm) |
| Weight | 5.5 lbs (2.5 kg) |
| Housing Material | Metal with powder coating |
| Cooling | Convection (fanless) |
| Display | 4-digit LED display |
| Built-in Programs | 21 auto programs + sound-activated macros |
| Strobe Rate | 0-20 Hz |
| Dimmer | 0-100% electronic |
| Mounting Options | Floor stand, truss clamp (bracket included) |
| Included Accessories | Mounting bracket, power cord, user manual |
| Safety Approvals | ETL, CE compliant |
| Recommended Cleaning | Wipe with dry cloth; avoid solvents |
| Repair Information | Contact authorized service center; no user-serviceable parts |
Frequently Asked Questions - 5PX HEX Pearl Adj
How do I set up the 5PX HEX Pearl for the first time?
Connect the power cord to a suitable AC outlet and ensure the fixture is on a stable surface. Use the included mounting bracket for truss or floor placement. Power on using the switch, and the display will show the current mode.
What are the available DMX channel modes?
The fixture offers 6-channel, 7-channel, and 11-channel modes. Select via the menu: press MENU, navigate to dMx, choose 6CH, 7CH, or 11CH, then press ENTER.
How do I set the DMX address?
Press MENU repeatedly until A001 appears. Use UP/DOWN to set the desired address (1-512), then press ENTER.
Can I run multiple units together without a DMX controller?
Yes, use Master/Slave mode. Set one unit as Master (choose MAs in menu) and others as Slave (SLAv). Connect them via 3-pin XLR cables.
How do I activate sound-activated mode?
Press MENU until SoUn appears, then press ENTER. Use UP/DOWN to choose sensitivity level (S1-S9), then press ENTER again.
What does the UV LED do?
The UV (ultraviolet) LED creates black light effects, making fluorescent materials glow. It can be used alone or mixed with other colors for special effects.
How do I clean the fixture?
Turn off and unplug the fixture. Allow it to cool. Use a soft, dry cloth to wipe the housing and lenses. Do not use abrasive cleaners or solvents. Clean the fans and vents periodically with compressed air.
What should I do if the fixture stops responding?
Check power connections and cables. Verify DMX address and cable orientation. Do a Factory Reset via menu: press MENU, scroll to FACt, then press ENTER. If issue persists, contact support.
Is this fixture suitable for outdoor use?
No, the 5PX HEX Pearl is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the unit.
What type of fuse does it use and how do I replace it?
It uses a T1A/250V fuse located inside the power inlet. To replace, disconnect power, use a flathead screwdriver to pop out the fuse holder, and replace with the same type. Do not bypass the fuse.
User questions about 5PX HEX Pearl Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual 5PX HEX Pearl - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5PX HEX Pearl by Adj.