U 47 fet i - Microphone NEUMANN - Free user manual and instructions
Find the device manual for free U 47 fet i NEUMANN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Microphone |
| Brand | Neumann |
| Model | U 47 fet i |
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz – 20 kHz |
| Impedance | 50 ohms |
| Sensitivity | 13 mV/Pa at 1 kHz into 1 kohm |
| Maximum SPL | 140 dB SPL (with pre-attenuation) |
| Equivalent Noise Level | 10 dB (A-weighted) |
| Signal-to-Noise Ratio | 84 dB (A-weighted at 94 dB SPL) |
| Power Requirement | 48 V phantom power (P48) |
| Current Consumption | 0.5 mA |
| Connector | XLR 3-pin |
| Dimensions (Length) | 185 mm |
| Dimensions (Diameter) | 56 mm |
| Weight | 500 g |
| Included Accessories | Wooden box, elastic suspension |
| Switches | Low-frequency roll-off, 10 dB pre-attenuation |
| Operating Temperature | 0°C to +70°C |
| Storage Temperature | -20°C to +70°C |
| Compliance | RoHS |
Frequently Asked Questions - U 47 fet i NEUMANN
How do I connect the U 47 fet i to my audio interface?
Connect the microphone to your audio interface using a standard XLR cable. Ensure your interface provides 48 V phantom power and that the phantom power is enabled.
Does the U 47 fet i require any special power supply?
No, it operates on standard 48 V phantom power (P48) supplied by your mixer or audio interface. No external power supply is needed.
What do the switches on the microphone do?
The microphone has two switches: a low-frequency roll-off to reduce bass rumble and a pre-attenuation pad (-10 dB) to handle high sound pressure levels.
What polar pattern does the U 47 fet i have?
It has a fixed cardioid polar pattern, which picks up sound from the front and rejects sound from the rear.
How should I clean the U 47 fet i?
Use a soft, dry cloth to wipe the exterior. For the grille, gently brush off dust. Avoid using liquids or compressed air directly on the capsule.
Can I use the U 47 fet i without phantom power?
No, the microphone requires 48 V phantom power to operate. It will not produce any output without it.
What is the maximum SPL the microphone can handle?
With the pre-attenuation switch engaged, the U 47 fet i can handle 140 dB SPL before clipping.
Is the U 47 fet i suitable for recording vocals?
Yes, its cardioid pattern and smooth frequency response make it excellent for vocals, as well as speech and many instruments.
What accessories are included in the box?
The microphone comes with a wooden box and an elastic suspension mount for isolation.
How do I store the U 47 fet i when not in use?
Store it in the provided wooden box in a dry environment with temperatures between -20°C and +70°C. Avoid humidity and extreme heat.
User questions about U 47 fet i NEUMANN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual U 47 fet i - NEUMANN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. U 47 fet i by NEUMANN.
USER MANUAL U 47 fet i NEUMANN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NEUMANN
Model : U 47 fet i
Category : Microphone