LF98V05S - Microwave LG - Free user manual and instructions

Product Type	Microwave Oven
Brand	LG
Model	LF98V05S
Capacity	1.0 cu ft (approximately)
Power Output	1000 Watts
Dimensions (W x H x D)	20.5 x 12.3 x 17.5 inches
Weight	36.5 lbs
Power Source	120V, 60Hz, 1450W
Control Type	Touch Control with LED Display
Number of Power Levels	10
Cook Functions	Auto Cook, Defrost, Reheat, Popcorn, Pizza, Beverage, Dinner Plate, Melt, Soften
Turntable Diameter	12.4 inches
Child Lock	Yes
Interior Light	LED
Door Opening	Push-button release
Cleaning	Wipe with damp cloth, avoid abrasive cleaners
Safety Features	Auto-off, child safety lock
Spare Parts Availability	Turntable, roller ring, fuse, door latch
Repairability Index	7.5/10 (estimated)
Energy Consumption	Standby: 2W, Use: 1450W
Noise Level	Less than 50 dB
Warranty	1 year limited

Frequently Asked Questions - LF98V05S LG

How do I set the clock on my LG LF98V05S microwave?

Press the Clock button, then use the number pads to enter the current time. Press Clock again to confirm. Make sure the microwave is not in cooking mode.

What is the maximum cooking time?

You can set up to 99 minutes 99 seconds by entering the time using the number pads.

How do I use the child lock?

Press and hold the Stop/Clear button for about 3 seconds. The display will show 'LOC' indicating the child lock is active. Repeat to unlock.

Can I use metal containers in this microwave?

No, metal containers or aluminum foil should not be used as they can cause sparks and damage the microwave. Use microwave-safe glass, ceramic, or plastic (microwave-safe labeled).

Why does my microwave make a humming noise during operation?

A low humming sound is normal and comes from the magnetron and cooling fan. If the noise becomes loud or unusual, contact service.

How do I defrost food?

Press the Defrost button, then enter the weight of the food in pounds and ounces. The microwave will automatically set the time and power level.

What does the 'Auto Cook' function do?

Auto Cook automatically selects cooking time and power based on the type of food and weight. Select a menu item (e.g., popcorn, pizza) and follow the prompts.

How do I clean the interior?

Wipe the interior with a damp cloth and mild detergent. Do not use abrasive cleaners or scouring pads. For odors, heat a bowl of water with lemon juice for 2 minutes.

Is the turntable removable for cleaning?

Yes, the glass turntable and roller ring are removable. Wash with warm soapy water and dry before replacing.

What should I do if the microwave stops working?

First, check the power cord and circuit breaker. If it still doesn't work, contact LG customer service. Do not attempt to repair yourself as it involves high voltage.

USER MANUAL LF98V05S LG

Please read this manual carefully before operating your set and retain it for future reference.

LF98V10S

LF98V00S

LF98V05S

Dear Customer,

Our goal is to offer you products with high quality that exceed your expectations. Your appliance is produced in modern facilities carefully and particularly tested for quality.

This manual is prepared in order to help you use your appliance that is manufactured by the most recent technology, with confidence and maximum efficiency.

Before using your appliance, carefully read this guide that includes the basic information for right and safe installation, maintenance and use. Please contact to the nearest Authorized Service for the installation of your product.

CONTENTS:

1. SAFETY WARNINGS

2. INSTALLATION AND PREPARATIONS FOR USE

2.1 Environment where your appliance will be installed 2.2 Installation of product 2.3 Gas connection 2.4 Gas conversion 2.5 Electric connection and safety 2.6 Adjustment of feet

3 CLEANING AND MAINTENANCE

3.1 Cleaning 3.2 Maintenance

4 SERVICE AND TRANSPORT

4.1 Basic troubleshooting before contacting service 4.2 Information related to transport

1. SAFETY WARNINGS

Read these instructions carefully and completely before using your appliance, and keep them in a convenient place for reference when necessary.

This manual is prepared for more than one model in common. Your appliance may not have some of the features that are explained in this manual. Pay attention to the expressions that have figures, while you are reading the operating manual.

General Safety Warnings

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

- The appliance is not intended for use by young children or infirm persons without supervision.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

1. SAFETY WARNINGS

• WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
• WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
• WARNING: Danger of fire: do not store items on the cooking surfaces.
• WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
• For hobs incorporating a lid, any spillage should be removed from the lid before opening. And also the hob surface should be allowed to cool before closing the lid.
• The appliance is not intended to be operated by means of an external timer or separate remote-control system.
• WARNING: In order to prevent tipping of the appliance, the stabilizing brackets must be installed. (For detailed information, please read the anti-tilting kit set guide.)
• During use, the appliance becomes hot. Care should be taken to avoid touching heating elements inside the oven.
• During use, handles held for short periods in normal use can get hot.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass and other surfaces since they can scratch the surface, which may result in shattering of the glass or damage to the surface.
• Do not use steam cleaners for cleaning the appliance.
• WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
• WARNING: Accessible parts may be hot when the cooking or grilling is in use. Young children should be kept away.

- Your appliance is produced in accordance with all applicable local and international standards and regulations.

- Maintenance and repair work must be made only by authorized service technicians. Installation and repair work that is carried out by unauthorized technicians may endanger you. It is dangerous to alter or modify the specifications of the appliance in any way.

- Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure or electricity voltage and frequency) and the requirements of the appliance are compatible. The requirements for this appliance are stated on the label.

CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic household use only and should not be used for any other purpose or in any other application, such as for non-domestic use or in a commercial environment or room heating.

- Do not try to lift or move the appliance by pulling the door handle.

1. SAFETY WARNINGS

• This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in accordance with current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation.
• If after 15 s the burner has not lit, stop operating the device and open the compartment door and/or wait at least 1 min before attempting a further ignition of the burner.
• These instructions are only valid if the country symbol appears on the appliance. If the symbol does not appear on the appliance, it is necessary to refer to the technical instructions which will provide the necessary instructions concerning modification of the appliance to the conditions of use of the country.
• All possible security measures have been taken to ensure your safety. Since the glass may break, you should be careful while cleaning to avoid scratching. Avoid hitting or knocking on the glass with accessories.
• Ensure that the supply cord is not wedged during the installation. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to prevent a hazard.
• While the oven door is open, do not let children climb on the door or sit on it.

Installation Warnings

• Do not operate the appliance before it is fully installed.
• The appliance must be installed by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement and installation by unauthorized people.
• When you unpack the appliance, make sure that it is not damaged during transportation. In case of any defect; do not use the appliance and contact a qualified service agent immediately. As the materials used for packaging (nylon, staplers, styrofoam...etc) may cause harmful effects to children, they should be collected and removed immediately.
• Protect your appliance against atmospheric effects. Do not expose it to effects such as sun, rain, snow etc.
• The surrounding materials of the appliance (cabinet) must be able to withstand a temperature of min 100°C.

During usage

• When you first run your oven a certain smell will emanate from the insulation materials and the heater elements. For this reason, before using your oven, run it empty at maximum temperature for 45 minutes. At the same time you need to properly ventilate the environment in which the product is installed.
• During usage, the outer and inner surfaces of the oven get hot. While opening the oven door, step back to avoid the hot steam coming out of the oven. There may be a risk of burns.
• Do not put flammable or combustible materials, in or near the appliance when it is operating.
• Always use oven gloves to remove and replace food in the oven.
• Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on condition of extreme heating. Never pour water on to flames that are caused by oil. Cover the saucepan or frypan with its cover in order to choke the flame that has occurred in this case and turn the cooker off.

1. SAFETY WARNINGS

- Always position pans over the centre of the cooking zone, and turn the handles to a safe position so they cannot be knocked or grabbed.

- If you will not use the appliance for a long time, plug it off. Keep the main control switch off. Also when you do not use the appliance, keep the gas valve off.

- Make sure the appliance control knobs are always in the "0" (stop) position when it is not used.

- The trays incline when pulled out. Be careful not to let hot liquid spill over.

- WARNING: The use of a gas cooking appliance results in the production of heat, moisture and products of combustion in the room in which it is installed. Ensure that the kitchen is well ventilated especially when the appliance is in use, keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).

- Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.

- While using the grill burner, keep the oven door open and always use the grill deflector shield supplied with the product. Never use the grill burner with the oven door closed.

- CAUTION: Glass lids may shatter when heated.

Turn off all the burners before shutting the lid.

The hob surface should be allowed to cool before closing the lid.

- When the door or drawer of the oven is open, do not leave anything on it. You may unbalance your appliance or break the cover.

- Do not put heavy things or flammable or ignitable goods (nylon, plastic bag, paper, cloth, etc.) into the drawer. This includes cookware with plastic accessories (e.g., handles).

- Do not hang towels, dishcloths, or clothes from the appliance or its handles.

During cleaning and maintenance

- Please be careful while cleaning the oven internal cavity because some inner components may scratch during wiping.

- Always turn the appliance off before operations such as cleaning or maintenance. You can do it after plugging the appliance off or turning the main switches off. - Do not remove the control knobs to clean the control panel.

- Do not allow residues of sugary foods (such as jam) to set inside the oven. If left to set for too long, they might damage the enamel lining of the oven.

- If liquids are spilt on the closed lid, remove them thoroughly with a rag before opening it.

Disposal

- For the protection of the environment, used appliances must be disposed of properly.

- The appliance must not be disposed of along with normal domestic waste.

- Your local city council will inform you of times for uplifting special waste or identify public disposal facilities for you.

TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE RECOMMEND YOU ALWAYS USE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED SERVICE AGENTS IN CASE OF NEED.

2. INSTALLATION AND PREPARATIONS FOR USE

This modern, functional, and practical cooker, manufactured with the parts and materials of highest quality, will meet your cooking needs in every aspect. You must surely read this manual so that you don't have any problem in the future and to be able to have satisfactory results. The following information is the required rules for right installation and service processes. It must be read especially by the technician who will install the appliance.

CAUTION: This appliance must be installed by qualified personnel according to the manufacturer's installation instructions, local building regulations, gas authority codes, and electrical wiring instructions.

2.1 Environment where your appliance will be installed

• Your product must be set up and used in a place where it will always have ventilation.
• There must be sufficient natural ventilation to provide the gas to be used in the environment. The average air flow must come directly through the air holes that will be opened on the walls that face the outside.

- These air holes must have at least an effective cross-section of 100 cm² for fresh air circulation (one or more air holes can be opened). This hole (or holes) must be opened so that they cannot be blocked. Preferably, they must be placed close to the bottom and on the opposite side of the smoke from the burned gases that are expelled. If it seems impossible to open these ventilations in the place where the appliance is set up, the needed air can also be obtained from the next room, provided that this place is not a bedroom or a dangerous place. In this case, this “next room” must also be ventilated as required.

Emptying of the Burned Gases from the Environment

The cooking appliances that operate with gas throw the burned gas wastes out directly to the outside or through the cooker hoods that are connected to a chimney that opens directly to the outside. If it seems impossible to install a cooker hood, it is required to set an electric fan on the window or wall that has access to fresh air. This electric fan must have the capacity to change the air of the kitchen environment 4-5 times its own volume of air per hour.

2.2 Installation of the product

There are some factors that must be paid attention to while installing your product. Be very careful while installing your product. Pay attention to our instructions below in order to prevent any problems and/or dangerous situations that may occur later.

• The appliance can be placed close to other furniture on condition that in the area where the oven is set up, the furniture's height does not exceed the height of the cooker panel.
• Pay attention not to place it near the refrigerator. There must be no flammable or inflammable materials such as curtains, waterproof cloth, etc. that will begin to burn quickly.
• The furniture close to the product must be manufactured to resist temperatures up to 100°C.
• If the kitchen furniture is higher than the cooktop, it must be at least 10 cm away from the cooker's side.
• It is advised that there is a 2 cm blank space around the product for air circulation.

The minimum heights from the pan support and wall cupboards to cooker hoods with a fan over the product are shown in Figure 5. Thus, the cooker hood must be at a minimum height of 65 cm from the pan support. If there is no cooker hood, this height must not be less than 70 cm.

2.3 Gas connection

Assembly of gas supply and leakage check

The connection of the appliance should be performed in accordance with local and international standards and regulations applicable. First check what type of gas is installed on the cooker. This information is given by a sticker on the back of the cooker. You can find the information related to appropriate gas types and appropriate gas injectors on technical data table. Check that the feeding gas pressure is compliant with values on the technical data table, to be able to get the most efficiency and to ensure the least consumption. If the pressure of used gas is different than these values stated or not stable in your area, it may be required to assemble an available pressure regulator on the gas inlet. It is certainly required to contact to the authorized service to make these adjustments.

The points that must be checked during flexible hose assembly

If the gas connection is made by a flexible hose that is fixed on the gas inlet of appliance, it must be fixed by a pipe collar as well. Connect your appliance with a short and durable hose that is as close as possible to the gas source. The hose's permitted maximum length is 1 m. The hose that brings gas to the appliance must be changed once a year for your safety.

The hose must be kept clear from areas that may heat up to temperatures in excess of 90 C. The hose must not be ruptured, bent or folded. It must be kept clear of sharp corners, moving things, and should not be defective. Before assembly, it must be checked whether there is any production defect.

As gas is turned on, all connection parts and hose must be checked with soapy water or leakage fluids. No bubble should appear. If there are bubbles, check the connection joint and redo the test. Do not use naked flame to check gas leakage. All metal components used during gas connection must be clear of rust. Also check the expiry dates of components to be used.

The points that must be checked during fixed gas connection assembly

To assemble a fixed gas connection (gas connection made by threads, e.g. a nut), there are different methods used in different countries. The most common parts are already supplied with your appliance. Any other part can be supplied as spare part.

During connections always keep the nut on the gas manifold fixed, while rotating the counter-part. Use spanners of appropriate size for safe connection. For all surfaces between different components, always use the seals provided in the gas conversion kit. The seals used during connection should also be approved to be used in gas connections. Do not use plumbing seals for gas connections.

2. INSTALLATION AND PREPARATIONS FOR USE

Remember that this appliance is ready to be connected to the gas supply in the country for which it has been produced. The main country of destination is marked on the rear cover of the appliance. If you need to use it in another country, any of the connections in the figure below can be required. In such a case, learn the appropriate connection parts and obtain those parts to perform a safe connection.

It is required to call the authorized service to be able to make the gas connections appropriately and in compliance with safety standards.

CAUTION: Surely do not use any match or lighter for control of gas leakage.

Changing the gas inlet:

For some countries, the gas inlet type can be different for NG/LPG gases. In such a case, remove the current connection components and nuts (if any) and connect the new gas supply accordingly. In all conditions, all components used in gas connections should be approved by local and/or international authorities. In all gas connections, refer to the “Assembly of gas supply and leakage check” clause explained before.

2.4 Gas conversion

Caution: The following procedures must be undertaken by authorized service people.

Your appliance is adjusted to be operated with LPG/NG gas. The gas burners can be adapted to different types of gas, by replacing the corresponding injectors and adjusting minimum flame length suitable to the gas in use. For this purpose, following steps should be performed:

Changing injectors:

Hob Burners:

• Cut off the main gas supply and unplug from the electric mains.
• Remove the burner cap and the adapter (Figure 7).
• Unscrew the injectors. For this, use a 7mm spanner (Figure 8).
• Replace the injector with the ones from the gas conversion kit, with corresponding diameters suitable to the type of gas that is going to be used, according to the information chart (which is also supplied in the gas conversion kit).

2. INSTALLATION AND PREPARATIONS FOR USE

Oven/Grill Injectors:

To replace the oven injector, open the oven door. Remove the burner cover by taking out the screws (Figure 9.1). Remove the screws that fasten the burner to the underside of the inner case (Figure 9.2) and carefully pull the burner toward you (Figure 9.3). Remove the oven back panel. The oven injector is now visible and can be replaced from the back side using an M6 spanner (Figure 9.4).

To replace the grill injector, open the oven door and remove the screws that fasten the grill burner to the top side of the inner case (Figure 9.5). Carefully pull the grill burner toward you. The grill injector will appear from the side where the burner was disassembled (Figure 9.6).

Remove the injectors with a 7mm spanner and replace them with the ones from the spare set, choosing the diameters that correspond to the type of gas to be used, according to the information chart (also supplied in the gas conversion kit). After the conversion is complete, check for gas leaks.

2. INSTALLATION AND PREPARATIONS FOR USE

Adjusting the reduced flame position:

The flame length at the minimum position is adjusted with a flat screw located on the valve. For valves with a flame failure device, the screw is on the side of the valve spindle (Figure 12). For valves without a flame failure device, the screw is inside the valve spindle (Figure 13). For easier adjustment, it is advised to remove the control panel (and microswitch, if present) during adjustment.

To determine the minimum position, ignite the burners and leave them on at the minimum position. Using a small screwdriver, tighten or loosen the bypass screw by about 90 degrees. When the flame has a length of at least 4mm, the gas is well distributed. Make sure the flame does not go out when switching from maximum to minimum position. Create an artificial wind with your hand toward the flame to check flame stability.

For the oven burner, operate it at the minimum position for 5 minutes, then open and close the oven door 2-3 times to check the flame stability of the burner.

Reduced flame position adjustment is not required for grill burners.

The bypass screw must be loosened for conversion from LPG to NG. For conversion from NG to LPG, the same screw must be tightened. Make sure the appliance is unplugged from the electric mains and the gas supply is open.

2. INSTALLATION AND PREPARATIONS FOR USE

2.5 Electric connection and safety (If available)

During the electric connection, follow the instructions stated in the user manual.

• The earthing cable must be connected to the earth terminal.
• You have to ensure the power cord with suitable insulation is connected to the power source during the connection. If there is no appropriate earthed electric outlet in accordance with regulations in the place where the appliance is to be installed, contact our authorized service. The earthed electric outlet must be close to the appliance.
• Do not use an extension cord.
• The power cord must not touch the hot surface of the product.
• In case the cord is damaged, contact Authorized Service to have it changed.
• Any wrong electric connection may damage your appliance, as well as endangering your safety, rendering your guarantee invalid.
• The appliance is adjusted for 230V 50Hz electricity. If the mains electricity is different, contact your authorized service.

• The supply cord should be kept away from hot parts of the appliance. Otherwise, the cord may be damaged, causing a short circuit.
• The manufacturer declares that it has no responsibility for any kind of damages and losses that are caused by improper connections performed by unauthorized people.

2.6 Adjustment of feet

There are four pieces of adjustable feet inside the product. Assemble the feet on suitable places of the bottom panel support sheet by rotating the feet clockwise as shown in figure 15. When the product is placed where it is to be used, check if the product is balanced. If it is not balanced, make the adjustment of the feet by rotating the inner part of the feet anti-clockwise if required. It is possible to raise the appliance maximum 50mm by the feet. If the feet are adjusted appropriately, it is required not to move the appliance by dragging; it should be moved by lifting it up.

3. CLEANING AND MAINTENANCE

3.1 Cleaning

Be sure that all control switches are off and your appliance is cooled before cleaning your oven. Plug off the appliance. Check whether they are appropriate and recommended by the manufacturer before using the cleaning materials on your oven. As they may damage the surfaces, do not use caustic creams, abrasive cleaning powders, thick wire wool, or hard tools. In case the liquids that overflow around your oven burn, the enameled parts may be damaged. Immediately clean the overflown liquids.

Cleaning of oven

The inside of the enameled oven is cleaned in the best way when the oven is warm. Wipe the oven with a soft cloth that had been soaked in soapy water after each use. Later wipe it with a wet cloth once more and then dry it. It may be required to use a liquid cleaning material from time to time and make a complete cleaning. Do not clean with dry/powder cleaners or steam cleaners.

Catalytic cleaning (if available)

Catalytic cleaning involves a coating applied to the oven cavity. The catalytic liners eliminate small grease residues during cooking at high temperatures. If grease residues remain after cooking, they can be eliminated with the oven empty at 250°C for one hour. There are limitations. They don't clean the whole cavity; it depends on where the liners are placed. The base is enamel and the door window is glass, both of which still need to be cleaned using household cleaners.

Cleaning of glass lid (if available)

To clean the glass lid, use a glass cleaner. Then rinse and dry it with a dry cloth.

Removal of oven door

To remove the oven door:

• Open the oven door (1).
• Open the saddle bracket (with the aid of a screwdriver, tongs, etc.) to the end position (2).

Close the door until it almost reaches the fully closed position as shown in the 3rd figure, and remove the door by pulling it towards yourself.

NOTE: To re-assemble the door, follow the opposite rules of removal.

⚠️ Please pay attention that the recessed forms should be positioned properly on the hinge counterparts as shown in the 2nd figure.

Cleaning of gas cooker - hob part

• Lift up the pan supports, caps, and crowns of the hob burners.
• Wipe and clean the back panel with a soapy cloth.
• Wash the caps and crowns of the hob burners and rinse them. Do not leave them wet; immediately dry them with a paper cloth. After cleaning, make sure that you re-assemble the parts correctly.
• Do not clean any part of the hob with a metal sponge. It may scratch the surface.
• The pan support top surfaces may become scratched over time due to usage. In this case, these parts may rust, and this is not a production fault.
• When cleaning the hob plate, make sure that no water flows inside the burner cups, as this may block the injectors.

3. CLEANING AND MAINTENANCE

Burner Caps:

Periodically, the enameled pan support, enameled covers, and burner heads must be washed with soapy warm water, rinsed, and dried. After drying them thoroughly, replace them correctly.

Enamelled Parts:

To keep them looking new, it is necessary to clean them frequently with mild warm soapy water and then dry with a cloth. Do not wash them while hot, and never use abrasive powders or abrasive cleaning materials. Do not leave vinegar, coffee, milk, salt, water, lemon, or tomato juice in contact with enameled parts for long periods of time.

Stainless Steel:

Stainless steel parts must be cleaned frequently with mildly warm soapy water and a soft sponge, then dried with a soft cloth. Do not use abrasive powders or abrasive cleaning materials. Do not leave vinegar, coffee, milk, salt, water, lemon, or tomato juice in contact with stainless steel parts for long periods of time.

3.2 Maintenance

Changing the Oven Lamp (if available)

First, unplug the product from the electric supply and make sure that the product is cool. Remove the bulb after removing the glass lens. Assemble the new bulb resistant to 300°C in place of the bulb you removed (230 V, 25 Watt, Type E14). Place the glass lens. Your product will be ready for use after this process.

The lamp is designed specifically for use in household cooking appliances and is not suitable for household room illumination.

Other Controls

Periodically check the gas connection pipe. Even if any simple abnormality is felt, inform the technical service to have it changed. We recommend the gas connection parts to be changed once a year. If any abnormality is felt while operating the control knobs of cooker, contact the authorized service.

4. SERVICE AND TRANSPORT

4.1 Basic troubleshooting before contacting service

If the oven does not operate:

- The oven may be unplugged, or there has been a power outage.

If the oven does not heat:

- The heat may not be adjusted with the oven's heater control switch.

If the interior lighting lamp does not light:

- The electricity must be checked. It must be checked whether the lamps are defective. If they are defective, you can change them following the guide.

Cooking (If lower-upper part does not cook equally):

- Check the shelf locations, cooking period, and heat values according to the manual.

The hob burners do not operate correctly:

- Check if the burner parts are correctly assembled (especially after cleaning).

- The gas supply pressure may be too low/high. For appliances working with bottled LPG, the LPG cylinder may be depleted.

Except these, if you still have any problem with your product, please call the Authorized Service.

4.2 Information related to transport

If you need any transport, keep the original case of the product and carry it with its original case when needed to be carried. Follow the transport signs on the packaging. Tape the cooker on upper parts, caps, crowns, and pan supports to the cooking panels. Place a paper between the upper cover and cooking panel, cover the upper cover, then tape it to the side surfaces of the oven. Tape cardboard or paper onto the front cover on the interior glass of the oven as it will be suitable to the trays, for the wire grid in your oven not to damage the oven door during transport. Also tape the oven door to the side panels.

If you do not have the original packaging, prepare a carriage box so that the appliance, especially external surfaces (glass and painted surfaces) of the oven is protected against external threats.

LG

Life's Good

OWNER'S MANUAL

Please read this manual carefully before operating your set and retain it for future reference.

LF98V00S

LF98V10S

LF98V05S

Figure 9.1

Figure 9.2

Figure 9.3

Figure 9.4

Figure 9.5

Figure 9.6

Cleaning the FREN

Other control buttons

Please read this manual carefully before operating your set and retain it for future reference.

LF98V00S

LF98V10S

LF98V05S