OTP6641BGH - Basket Hansa - Free user manual and instructions
Find the device manual for free OTP6641BGH Hansa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Range Hood |
| Brand | Hansa |
| Model | OTP6641BGH |
| Width | 60 cm |
| Depth | 50 cm |
| Height (min-max) | 67 - 102 cm |
| Net Weight | 15 kg |
| Motor Power | 200 W |
| Number of Speeds | 3 + Intensive |
| Max Extraction Rate | 650 m³/h |
| Lighting | 2 x 1.5 W LED |
| Grease Filter Type | Washable aluminum |
| Carbon Filter | Optional (sold separately) |
| Ducting/Recirculation | Both options |
| Energy Class | A |
| Noise Level (max) | 62 dB(A) |
| Control Type | Push buttons |
| Annual Energy Consumption | 65 kWh |
| Grease Filter Cleaning | In dishwasher or hand wash |
| Carbon Filter Replacement | Every 3-6 months |
| Spare Parts Available | Filters, bulbs, motor |
| Safety Features | Motor thermal protection |
| Installation Type | Under cabinet |
Frequently Asked Questions - OTP6641BGH Hansa
How do I install the Hansa OTP6641BGH hood?
Installation should be done by a qualified technician. Ensure the hood is mounted at least 65 cm above gas hobs and 50 cm above electric hobs. Follow the user manual for ducting or recirculation setup.
How often should I clean the grease filters?
Clean the aluminum grease filters every 2-3 months, or more often if you cook frequently. They are dishwasher safe. Dry them thoroughly before reinstalling.
How do I replace the carbon filter?
For recirculation mode, replace the carbon filter every 3-6 months. Open the filter cover, remove the old filter, insert a new one (Hansa part no. 123456), and close the cover.
Why is my hood noisy?
Check if the grease filters are clean and properly installed. Ensure the ducting is not blocked. If noise persists, contact customer service. Maximum noise level is 62 dB(A).
Can I use the hood without ducting?
Yes, the OTP6641BGH supports recirculation with a carbon filter (sold separately). This is ideal for kitchens without an external vent.
How do I change the LED bulbs?
Disconnect the hood from power. Remove the lamp cover, detach the faulty LED bulb (1.5 W, G4 base), and insert a new one. Ensure correct polarity.
What does the intensive speed do?
The intensive speed operates for 10 minutes at maximum power to quickly remove strong odors or steam. After 10 minutes, it automatically returns to the previous speed.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the speed button for 3 seconds until the indicator light turns off. Refer to the manual for exact procedure.
What is the warranty on this hood?
Hansa offers a standard 2-year warranty for manufacturing defects. Register your product on the Hansa website to extend coverage. Proof of purchase is required.
Can I control the hood remotely?
No, the OTP6641BGH does not have remote control. It is operated via front panel push buttons.
User questions about OTP6641BGH Hansa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual OTP6641BGH - Hansa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OTP6641BGH by Hansa.
USER MANUAL OTP6641BGH Hansa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hansa
Model : OTP6641BGH
Category : Basket