641-ADDON - Beer dispenser Micro Matic - Free user manual and instructions
Find the device manual for free 641-ADDON Micro Matic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispenser (Add-on Tower) |
| Brand | Micro Matic |
| Model | 641-ADDON |
| Dimensions (H x W x D) | Approx. 200 x 150 x 100 mm |
| Weight | Approx. 2 kg |
| Material | Stainless Steel and Plastic |
| Power Supply | 100-240V AC, 50/60Hz |
| Cooling Type | None (add-on for existing cooler) |
| Dispensing Mechanism | Manual faucet with flow control |
| Compatible Keg Types | Standard D-system or S-system kegs |
| Maximum Pressure | 60 psi |
| Installation | Wall or countertop mount (horizontal) |
| Cleaning | Hand wash removable parts; line flushing required |
| Safety Features | Pressure relief valve; stable base design |
| Spare Parts Available | Faust, handles, gaskets, shanks |
| Warranty | 1 year limited |
| User Manual Pages | 180 |
| Languages | English (others via translation service) |
Frequently Asked Questions - 641-ADDON Micro Matic
How do I install the 641-ADDON beer dispenser?
Mount the tower securely on a sturdy horizontal surface or wall. Connect the beer and gas lines according to the keg coupler type. Ensure all connections are tight to avoid leaks.
What is the recommended cleaning frequency?
Clean the faucet and tower every two weeks with a mild beer line cleaner. Flush the entire line with warm water before and after cleaning to prevent bacterial buildup.
How can I adjust the pour speed?
Use the flow control screw on the faucet. Turn clockwise to reduce flow (less foam) or counterclockwise to increase. Also verify CO2 pressure is set correctly (typically 10-14 psi).
Why does my beer come out foamy?
Common causes: incorrect CO2 pressure, dirty lines, warm beer, or a loose connection. Check pressure, clean lines, and ensure the beer is properly cooled (38°F ideal).
Can I use this with any keg?
The 641-ADDON is compatible with most D-system and S-system kegs. For other types, you may need an adapter. Check your keg coupler compatibility.
How do I connect the gas line?
Attach the CO2 regulator to the gas side of the keg coupler. Set pressure between 10-14 psi for most lagers. Use a check valve to prevent beer backflow.
What if the dispenser leaks from the base?
Check the O-rings on the shank and faucet. They may be dry or damaged. Replace them if necessary and ensure the base gasket is properly seated.
Is this dispenser intended for outdoor use?
No, the 641-ADDON is designed for indoor use only. Do not expose to rain or extreme temperatures. Install in a dry, ventilated area.
How do I winterize the dispenser?
If not in use during cold months, disconnect and drain all lines. Remove the faucet and shank and store indoors. Flush with antifreeze solution if freezing is expected.
Where can I find spare parts for the 641-ADDON?
Spare parts such as faucets, handles, and gaskets are available from Micro Matic distributors or online retailers. Use the model number 641-ADDON for compatibility.
User questions about 641-ADDON Micro Matic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual 641-ADDON - Micro Matic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 641-ADDON by Micro Matic.
USER MANUAL 641-ADDON Micro Matic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Micro Matic
Model : 641-ADDON
Category : Beer dispenser