LTE7480-M804 - Router ZYXEL - Free user manual and instructions
Find the device manual for free LTE7480-M804 ZYXEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4G LTE Router |
| Model | LTE7480-M804 |
| Brand | ZyXEL |
| Dimensions (W x D x H) | 220 x 160 x 35 mm |
| Weight | 500 g |
| Power Supply | 12V DC, 2A |
| LTE Category | Cat6 (up to 300 Mbps download) |
| WiFi Standard | 802.11ac (dual-band 2.4GHz + 5GHz) |
| LAN Ports | 4x Gigabit Ethernet |
| WAN Port | 1x Gigabit Ethernet (configurable) |
| USB Port | 1x USB 2.0 (for storage or printer) |
| Antenna | 2x external detachable LTE antennas |
| SIM Slot | 1x Micro SIM |
| Firewall | SPI, DoS prevention |
| VPN Support | IPsec, PPTP, L2TP pass-through |
| Management | Web GUI, TR-069, SNMP |
| Maintenance | Keep device clean and dry; avoid direct sunlight |
| Safety | Use only included power adapter; do not disassemble |
| Spare Parts & Reparability | Contact authorized service center for repairs |
Frequently Asked Questions - LTE7480-M804 ZYXEL
How do I reset the ZyXEL LTE7480-M804 router to factory defaults?
Use a paperclip to press and hold the Reset button on the back panel for about 10 seconds until the power LED blinks. The router will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. Username: admin, Password: 1234 (or as printed on the device label).
How can I change the WiFi password?
Log in to the web interface, go to Advanced Setup > Wireless, select the band (2.4GHz or 5GHz), and enter a new pre-shared key. Click Apply.
Does this router support 5G networks?
No, the LTE7480-M804 supports 4G LTE Cat6 only, not 5G. It is backward compatible with 3G networks.
How do I set up the router for LTE internet?
Insert a compatible Micro SIM card with an active data plan, power on the router, and configure the APN settings in Network > Broadband > Cellular. The router should automatically connect.
Can I use the router as a wired router without LTE?
Yes. Connect an Ethernet cable from your modem to the WAN/LAN1 port and configure the connection type (e.g., DHCP, PPPoE) in the web interface.
What is the maximum number of wireless clients supported?
The router can support approximately 32 concurrent WiFi clients per band (64 total) under normal conditions.
How to update the firmware?
Download the latest firmware from the ZyXEL support website. Log in to the router, go to Maintenance > Firmware Upgrade, select the file, and click Upload. Do not power off during the upgrade.
Why is my internet speed slow?
Check signal strength by logging into the router and viewing Status > Cellular. Poor reception may require repositioning antennas or using an external antenna. Also check for interference on WiFi channels.
Can I use a third-party external antenna?
Yes, the router has two TS9 connectors for external LTE antennas. Ensure the antennas are compatible with your frequency bands and have suitable gain.
User questions about LTE7480-M804 ZYXEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual LTE7480-M804 - ZYXEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LTE7480-M804 by ZYXEL.
USER MANUAL LTE7480-M804 ZYXEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZYXEL
Model : LTE7480-M804
Category : Router