Samson 38200 - Sewing machine Union Special - Free user manual and instructions
Find the device manual for free Samson 38200 Union Special in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Single-needle lockstitch sewing machine |
| Brand | Union Special |
| Model | Samson 38200 |
| Dimensions (W x D x H) | Approx. 45 cm x 20 cm x 35 cm |
| Weight | Approx. 9 kg (machine head only) |
| Power Supply | 110-240 V AC, 50/60 Hz |
| Power Consumption | 90 W |
| Maximum Sewing Speed | Up to 5,000 stitches per minute |
| Stitch Length | Adjustable, 0-5 mm |
| Needle System | Standard industrial needle (e.g., 135×17) |
| Number of Threads | 1 needle, 1 looper (lockstitch) |
| Lubrication | Automatic oiling system |
| Presser Foot Lift | Manual lever, up to 10 mm |
| Safety Features | Power switch with emergency stop; needle guard |
| Maintenance | Regular cleaning of lint; oiling weekly; belt tension check monthly |
| Spare Parts Available | Needles, bobbins, bobbin case, presser feet, belts, oil wicks |
| Repairability | Modular design; parts accessible; service manual included |
| Included Accessories | Set of needles, bobbins, screwdrivers, oiler, instruction manual |
| Warranty | 1 year limited warranty (parts and labor) |
Frequently Asked Questions - Samson 38200 Union Special
How do I thread the Union Special Samson 38200 sewing machine?
First, raise the presser foot. Place a spool of thread on the spool pin. Guide the thread through the upper thread guide, down to the tension discs, then up through the take-up lever. Finally, thread the needle from front to back. Refer to the threading diagram in the manual for precise routing.
How do I adjust the stitch length on the Samson 38200?
Locate the stitch length adjustment lever or knob on the front of the machine. Turn it clockwise to shorten the stitch length (for finer stitches) or counterclockwise to lengthen it. The range is typically 0-5 mm. Test on scrap fabric after adjustment.
Why is my machine skipping stitches?
Skipped stitches are often caused by a bent, dull, or wrong-size needle. Replace the needle with a new industrial needle (e.g., 135×17). Also check thread tension: looper tension may be too tight or too loose. Ensure the needle is fully inserted and properly aligned.
How do I clean and oil the Samson 38200?
Unplug the machine. Remove lint and dust from the feed dogs, bobbin area, and needle plate with a soft brush. Apply sewing machine oil to the designated oiling points (usually indicated by red dots or arrows in the manual). Use only high-quality sewing machine oil. Wipe excess oil.
What type of needle does the Samson 38200 use?
It uses standard industrial sewing machine needles, typically system 135×17 (also known as DB×1). The exact needle size depends on the fabric: for light fabrics use size 70/10, for medium fabrics use 90/14, for heavy fabrics use 100/16 or 110/18.
How do I change the needle on the Union Special Samson 38200?
Turn off and unplug the machine. Loosen the needle clamp screw with a screwdriver. Remove the old needle. Insert the new needle with the flat side facing the back (for most models) and push it up as far as it goes. Tighten the screw securely.
What should I do if the thread keeps breaking?
Check for burrs or sharp edges on the needle plate, hook, or tension discs. Ensure the thread is not tangled and is properly seated in the tension discs. Reduce tension slightly. Use good quality thread. Also check that the needle is not damaged and is correctly inserted.
How do I adjust the tension on the Samson 38200?
Upper tension is adjusted by turning the dial on the front of the machine. Turn clockwise to increase tension, counterclockwise to decrease. Looper (bobbin) tension is adjusted by turning the small screw on the bobbin case. Test on fabric: balanced stitches look identical on both sides.
My machine is making a loud noise. What could be wrong?
Loud noises often indicate lack of lubrication or a loose belt. Oil all moving parts following the manual. Check the drive belt tension; it should flex about 1-2 cm when pressed. If noise persists, inspect the hook assembly for damage and ensure all screws are tight.
How do I replace the drive belt on the Samson 38200?
Unplug the machine. Remove the pulley cover. Loosen the motor mounting screws to release belt tension. Slip the old belt off and replace with a new one of the same size. Tighten the motor screws to achieve proper tension (belt deflects about 1 cm). Replace the cover.
User questions about Samson 38200 Union Special
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual Samson 38200 - Union Special and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Samson 38200 by Union Special.
USER MANUAL Samson 38200 Union Special
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Union Special
Model : Samson 38200
Category : Sewing machine