Smart Air Plus LAP500 - Air purifier BREVILLE - Free user manual and instructions
Find the device manual for free Smart Air Plus LAP500 BREVILLE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Purifier |
| Brand | Breville |
| Model | Smart Air Plus LAP500 |
| Dimensions (H x W x D) | 60 cm x 30 cm x 30 cm |
| Weight | 8 kg |
| Power Supply | 220-240V, 50/60 Hz |
| Power Consumption | 60 W |
| Noise Level | 20 - 50 dB |
| Coverage Area | Up to 50 m² |
| CADR (Clean Air Delivery Rate) | 300 m³/h |
| Filtration Stages | Pre-filter, HEPA H13, Activated Carbon |
| Fan Speeds | 4 (Sleep, Low, Medium, High) |
| Auto Mode | Yes (with air quality sensor) |
| Timer | 1-12 hours |
| Sleep Mode | Yes (dimmed lights, low noise) |
| Air Quality Indicator | LED ring (Green, Yellow, Red) |
| Filter Replacement Indicator | Yes |
| Filter Life | 6-12 months (depending on usage) |
| Maintenance | Vacuum pre-filter monthly; replace HEPA/carbon filter as indicated |
| Safety Features | Auto shut-off (when front cover opened), child lock |
| Spare Parts | Replacement filter pack (model LAP500-Filter) |
| Warranty | 2 years |
Frequently Asked Questions - Smart Air Plus LAP500 BREVILLE
How often should I replace the filter?
The filter should be replaced every 6 to 12 months, depending on usage and air quality. The filter replacement indicator will alert you.
How do I clean the pre-filter?
Vacuum the pre-filter every month or when dirty. Do not wash it; only vacuum gently.
Can I use the purifier in a large room?
The Smart Air Plus LAP500 is designed for rooms up to 50 m² (approx. 540 sq ft). For larger spaces, multiple units may be needed.
Is the purifier noisy?
Noise level ranges from 20 dB in Sleep mode to 50 dB at maximum speed. Sleep mode is whisper-quiet.
Does it have a timer?
Yes, you can set the timer from 1 to 12 hours. After the set time, the purifier turns off automatically.
How does the auto mode work?
The built-in air quality sensor detects particles and adjusts fan speed automatically. The LED ring shows green (good), yellow (moderate), or red (poor).
Can I wash the HEPA filter?
No, the HEPA and carbon filters are not washable. They must be replaced when the indicator shows.
What does the child lock do?
The child lock disables the control buttons to prevent accidental changes. Press and hold the lock button for 3 seconds to activate/deactivate.
Where should I place the purifier?
Place it on a flat, stable surface with at least 30 cm clearance on all sides for proper airflow. Avoid corners.
How do I reset the filter replacement indicator?
After replacing the filter, press and hold the Filter Reset button (usually the timer button) for 5 seconds until the indicator turns off.
User questions about Smart Air Plus LAP500 BREVILLE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual Smart Air Plus LAP500 - BREVILLE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Smart Air Plus LAP500 by BREVILLE.
USER MANUAL Smart Air Plus LAP500 BREVILLE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BREVILLE
Model : Smart Air Plus LAP500
Category : Air purifier