Hydrasynth Explorer - Synthesizer ASM - Free user manual and instructions
Find the device manual for free Hydrasynth Explorer ASM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Synthesizer |
| Model | Hydrasynth Explorer |
| Brand | ASM |
| Dimensions | 22.6 x 7.9 x 2.8 inches (57.4 x 20.1 x 7.1 cm) |
| Weight | 6.6 lbs (3.0 kg) |
| Power Supply | 9V DC (center positive) or USB-C (5V 3A) |
| Battery | Rechargeable Li-ion, up to 4.5 hours |
| Polyphony | 8 voices |
| Oscillators | 2 oscillators per voice with wave morphing, plus noise generator |
| Filters | 2 filters: state-variable filter and comb filter |
| Effects | Reverb, delay, chorus, flanger, phaser, EQ, and more |
| Keyboard | 37 mini keys with polyphonic aftertouch |
| Sequencer | 64-step sequencer with swing and randomization |
| Arpeggiator | Built-in arpeggiator with multiple modes |
| MIDI | USB-MIDI, 3.5mm TRS MIDI In/Out/Thru |
| Display | 128x64 OLED |
| Presets | 500+ factory presets |
| Audio Outputs | 1/4" TRS L/Mono, R, and 1/8" stereo headphone |
| Pedal Inputs | 1/4" TRS sustain pedal jack |
| Included Accessories | USB cable, quick start guide |
Frequently Asked Questions - Hydrasynth Explorer ASM
How do I power on the Hydrasynth Explorer?
Press the Power button on the left side of the front panel. The OLED display will light up.
How can I connect the Hydrasynth Explorer to my computer?
Use a USB-C cable to connect to your computer. It will appear as a USB audio/MIDI device. Install drivers if needed (macOS is class-compliant).
How do I update the firmware?
Download the latest firmware from the ASM website. Copy the .bin file to a USB drive, insert into the synth's USB port, and follow the on-screen instructions.
How do I save a patch I created?
Press Save button, then use the encoder to select a location. Press Save again to confirm.
How do I use polyphonic aftertouch?
Polyphonic aftertouch is always active on the keyboard. Press harder on a key to add aftertouch modulation to that note individually.
Can I use the Hydrasynth Explorer with batteries?
Yes, it has an internal rechargeable battery. Charge via USB-C. Battery life is approximately 4.5 hours depending on usage.
How do I reset the Hydrasynth Explorer to factory settings?
Hold the System button while powering on, then select Factory Reset from the menu. This erases all user data.
How do I sync the arpeggiator to an external clock?
Go to System > MIDI Clock and set to Auto or External. The arpeggiator will sync to incoming MIDI clock.
Does the Hydrasynth Explorer support CV/gate?
No, it does not have CV/gate outputs. It uses MIDI and USB for control voltage emulation.
How do I clean the Hydrasynth Explorer?
Use a soft, dry cloth to wipe the surface. Do not use any liquids or abrasive cleaners. Keep away from dust and moisture.
User questions about Hydrasynth Explorer ASM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Hydrasynth Explorer - ASM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hydrasynth Explorer by ASM.
USER MANUAL Hydrasynth Explorer ASM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASM
Model : Hydrasynth Explorer
Category : Synthesizer