AD-DWL.180 - Speaker QSC - Free user manual and instructions
Find the device manual for free AD-DWL.180 QSC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Loudspeaker |
| Brand | QSC |
| Model | AD-DWL.180 |
| Series | AcousticDesign |
| Application | Indoor/Outdoor Installation |
| Woofer Size | 8 inches |
| Power Handling (RMS) | 200 W |
| Impedance | 8 ohms |
| Frequency Response | 55 Hz – 20 kHz |
| Sensitivity (1W/1m) | 90 dB SPL |
| Maximum SPL | 116 dB |
| Coverage Pattern | 120° x 120° |
| Enclosure Material | MDF with weather-resistant paint |
| Grille Material | Powder-coated steel |
| Mounting | Wall-mount bracket included |
| Connectors | Euroblock (2-pin) |
| Dimensions (H x W x D) | 482 x 290 x 270 mm |
| Weight | 12.5 kg |
| Operating Temperature | -20°C to 50°C |
| Protection Rating | IP55 (with optional cover) |
| Accessories Included | Mounting bracket, manual |
Frequently Asked Questions - AD-DWL.180 QSC
What is the recommended amplifier power for the AD-DWL.180?
The recommended amplifier power is between 200 and 400 watts RMS at 8 ohms. Ensure the amplifier is stable at 8 ohms to avoid distortion or damage.
Can the AD-DWL.180 be used outdoors?
Yes, the AD-DWL.180 is designed for indoor and outdoor use. With an optional IP55 cover, it can withstand rain and dust. Avoid direct exposure to saltwater or extreme weather.
How do I mount the speaker on a wall?
Use the included wall-mount bracket. Secure the bracket to a load-bearing wall with suitable screws (not included). Attach the speaker to the bracket and tighten the locking screws. Ensure the speaker is level.
What type of cable should I use?
Use a 2-conductor speaker cable with a cross-section of at least 1.5 mm² (AWG 16). Strip 6 mm of insulation and insert into the Euroblock connector, ensuring correct polarity (+/-).
How to clean the speaker grille?
Remove the grille gently (if detachable). Use a soft brush or vacuum with low suction to remove dust. For stubborn dirt, use a slightly damp cloth with mild soap. Avoid wetting the drivers.
What is the dispersion angle of the AD-DWL.180?
The coverage pattern is 120° x 120°, providing wide, even sound distribution. For best results, place the speakers at ear height and avoid obstructions in front of the driver.
Can I daisy-chain multiple AD-DWL.180 speakers?
Yes, the Euroblock connector allows parallel connection. Ensure the total impedance does not drop below the amplifier's minimum rating. For example, two 8-ohm speakers in parallel equal 4 ohms.
Does the speaker have overload protection?
The AD-DWL.180 includes a built-in thermal protection circuit that automatically resets when the speaker cools down. Avoid prolonged overdriving to prevent damage.
What is the warranty period?
QSC offers a 6-year warranty for this product, covering manufacturing defects. Proof of purchase is required. Refer to the QSC warranty policy for details.
Where can I find spare parts?
Authorized QSC service centers can provide spare parts such as replacement woofers, grilles, or mounting brackets. Contact QSC support or visit their website for a list of service centers.
User questions about AD-DWL.180 QSC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual AD-DWL.180 - QSC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AD-DWL.180 by QSC.
USER MANUAL AD-DWL.180 QSC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : QSC
Model : AD-DWL.180
Category : Speaker