T6-600 - Measuring equipment FLUKE - Free user manual and instructions
Find the device manual for free T6-600 FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Non-Contact Voltage Tester and Electrical Tester |
| Brand | Fluke |
| Model | T6-600 |
| Measurement Category | CAT III 600 V, CAT IV 300 V |
| AC Voltage Range | 100 V to 600 V (via FieldSense) |
| AC Voltage Accuracy | ±(3% + 3 digits) |
| Resistance Range | 1 Ω to 100 kΩ |
| Resistance Accuracy | ±(1.5% + 2 digits) |
| Continuity Threshold | ≤ 20 Ω |
| Frequency Range | 45 Hz to 66 Hz |
| Frequency Accuracy | ±(0.5% + 2 digits) |
| FieldSense Technology | Yes, for voltage and frequency measurement without test leads |
| Display | Digital LCD, 6000 counts |
| Backlight | Yes |
| Input Impedance | > 10 MΩ (for voltage) |
| Power Supply | 2 AA batteries (IEC LR6) |
| Battery Life | Approximately 400 hours |
| Dimensions (H x W x D) | 282 x 40 x 50 mm (11.1 x 1.6 x 2.0 in) |
| Weight | 370 g (13.0 oz) including batteries |
| Jaw Opening | 17 mm (0.67 in) for 1 AWG copper |
| Safety Standards | IEC 61010-1, IEC 61010-2-033 |
| Operating Temperature | -10 °C to +50 °C (14 °F to 122 °F) |
| Storage Temperature | -30 °C to +60 °C (-22 °F to 140 °F) |
| Humidity | 0% to 95% (non-condensing) |
| Overvoltage Protection | 600 V rms |
| Accessories Included | Test leads, carrying case, batteries, user manual |
| Warranty | 3 years |
| Country of Origin | United States / China (depending on production lot) |
Frequently Asked Questions - T6-600 FLUKE
What is the Fluke T6-600 used for?
The Fluke T6-600 is a non-contact voltage tester and electrical tester used to measure AC voltage, resistance, continuity, and frequency without needing to touch live wires, using FieldSense technology.
How do I measure voltage with the T6-600?
To measure voltage, turn the dial to the FieldSense mode (the wave icon). Open the clamp around a single conductor. The voltage will be displayed. For grounded measurements, use the test lead for reference.
Does the T6-600 measure DC voltage?
No, the Fluke T6-600 is designed for AC voltage only. It does not measure DC voltage.
How do I test continuity with the T6-600?
Turn the dial to the continuity/ohm mode (the sound wave icon). Use the test leads to probe the circuit. If resistance is below 20 Ω, a beep will sound.
What batteries does the T6-600 use?
The T6-600 uses two AA batteries (IEC LR6). To replace them, remove the battery door on the back and insert new batteries observing polarity.
How do I clean the T6-600?
Clean the tester with a damp cloth and mild detergent. Do not use solvents or abrasive cleaners. Ensure the device is dry before use.
What safety precautions should I take when using the T6-600?
Always follow local safety regulations. Do not use the tester in wet conditions or on circuits above 600 V. Wear appropriate PPE. The device is rated CAT III 600 V and CAT IV 300 V.
How accurate is the T6-600?
The T6-600 has an accuracy of ±(3% + 3 digits) for voltage and ±(1.5% + 2 digits) for resistance, under standard conditions.
Can I replace the test leads?
Yes, the test leads are replaceable. Use only Fluke-approved test leads that meet safety standards. Contact Fluke customer service or an authorized dealer.
What does the FieldSense technology do?
FieldSense allows the T6-600 to measure AC voltage and frequency through the clamp without metallic contact to the live conductor, using a capacitive coupling method.
User questions about T6-600 FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual T6-600 - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T6-600 by FLUKE.
USER MANUAL T6-600 FLUKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLUKE
Model : T6-600
Category : Measuring equipment