2062R - Measuring equipment FLUKE - Free user manual and instructions
Find the device manual for free 2062R FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Fluke |
| Model | 2062R |
| Dimensions | 200 x 100 x 50 mm |
| Weight | 0.5 kg |
| Power Supply | 9V Alkaline Battery (NEDA 1604A, IEC 6LR61) |
| Display | LCD, 6000 counts |
| DC Voltage Range | 0.001 V to 1000 V |
| AC Voltage Range | 0.001 V to 1000 V |
| DC Current Range | 0.001 μA to 10 A |
| Resistance Range | 0.1 Ω to 40 MΩ |
| Capacitance Range | 1 nF to 1000 μF |
| Frequency Range | 0.001 Hz to 50 MHz |
| Continuity Test | Yes, audible beep |
| Diode Test | Yes |
| Safety Rating | CAT III 600V, CAT II 1000V |
| Auto Range | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes (20 minutes) |
| Spare Parts | Test leads, battery, fuse (F 10A, 1000V) |
| Maintenance | Clean with damp cloth; no solvents |
| Warranty | 3 years |
Frequently Asked Questions - 2062R FLUKE
How do I measure DC voltage with the Fluke 2062R?
Set the rotary switch to V⎓. Connect the black test lead to the COM jack and the red test lead to the V/Ω jack. Touch the probes to the test points and read the display.
What is the maximum voltage the Fluke 2062R can measure?
The Fluke 2062R can measure DC and AC voltage up to 1000V in CAT II environments and up to 600V in CAT III.
How do I replace the battery?
Turn off the meter and remove the test leads. Unscrew the battery door screw, lift the door, and replace the 9V battery with a new one (NEDA 1604A). Reattach the door.
What does the 'OL' reading mean?
OL stands for Overload. It indicates that the measured value exceeds the selected range. Switch to a higher range.
How do I test continuity?
Turn the dial to the continuity/ohm symbol ))). Connect the probes. If continuity exists (resistance < 50Ω), the meter beeps.
What safety precautions should I follow?
Always use the correct terminals, switch, and range. Do not exceed the rated voltage. Inspect test leads for damage. Use personal protective equipment. The meter is rated CAT III 600V.
Can I measure current without breaking the circuit?
No, for current measurement you must break the circuit and connect the meter in series. For AC current, use the 10A terminal for high currents.
How do I clean the Fluke 2062R?
Use a damp cloth with mild detergent or water. Do not use solvents, abrasives, or immerse the meter. Dry thoroughly before use.
What is the accuracy of the voltage measurement?
For DC voltage, accuracy is ±(0.5% + 2 digits). For AC voltage, accuracy is ±(1.0% + 3 digits) at 45-400 Hz.
How do I replace a blown fuse?
Turn off the meter and remove test leads. Unscrew the battery door and fuse compartment. Remove the blown fuse and replace with a F 10A 1000V fuse. Reassemble.
User questions about 2062R FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual 2062R - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2062R by FLUKE.
USER MANUAL 2062R FLUKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLUKE
Model : 2062R
Category : Measuring equipment