JWNR2000v5 - Router NETGEAR - Free user manual and instructions
Find the device manual for free JWNR2000v5 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Model | JWNR2000v5 |
| Brand | NETGEAR |
| Wireless Standard | IEEE 802.11 b/g/n (2.4 GHz) |
| Maximum Wireless Speed | 300 Mbps |
| Number of LAN Ports | 4 x 10/100 Mbps |
| Number of WAN Ports | 1 x 10/100 Mbps |
| Antennas | 2 external fixed antennas |
| Security | WPA/WPA2-PSK, WEP, WPS, Firewall |
| Dimensions (W x D x H) | 177 x 119 x 31 mm |
| Weight | 250 g |
| Power Supply | 12V DC, 1A adapter |
| Power Consumption | 6.5W (typical) |
| LED Indicators | Power, Internet, LAN, WLAN |
| Mounting | Desktop or wall-mountable |
| Setup | Web-based interface, Smart Wizard CD |
| Supported Operating Systems | Windows, Mac, Linux |
| Temperature Range | 0°C to 40°C (operating) |
| Humidity | 10% to 90% (non-condensing) |
| Regulatory Approvals | FCC, CE, RoHS |
| Entretien et Nettoyage | Wipe with dry cloth; unplug before cleaning |
| Pièces Détachées et Réparabilité | No user-serviceable parts; contact support |
Frequently Asked Questions - JWNR2000v5 NETGEAR
How do I reset my NETGEAR JWNR2000v5 router to factory defaults?
Press and hold the Reset button on the back of the router for about 7 seconds using a paperclip. Release when the power LED starts blinking. The router will reboot with factory settings.
What is the default IP address to access the router settings?
The default IP address is 192.168.1.1. Enter it in your browser's address bar. The default username is admin and password is password (or blank).
How can I change my Wi-Fi password?
Log into the router interface at 192.168.1.1, go to Wireless Settings, and enter a new passphrase in the 'Passphrase' field. Save settings to apply.
Does the JWNR2000v5 support guest networks?
Yes, it supports a guest network on the 2.4 GHz band. Enable it under Guest Network settings in the router interface and set a separate SSID and password.
What troubleshooting steps if I cannot connect to the internet?
Check that the Internet LED is on. Reboot the router and modem. Ensure cables are secure. Log into router and verify Internet connection type (PPPoE, DHCP) matches your ISP.
How to update the firmware on my JWNR2000v5?
Download the latest firmware from NETGEAR's support site. Log into router, go to Administration > Firmware Upgrade, upload the file, and wait for it to complete. Do not power off.
What wireless security options are available?
It supports WPA2-PSK, WPA-PSK, and WEP, as well as WPS. WPA2-PSK with AES is recommended for best security.
Can I use the JWNR2000v5 as a wireless repeater?
No, this model does not have a built-in repeater mode. It functions only as a primary router. You may use it as an access point by disabling DHCP and connecting via LAN.
What are the dimensions and weight of the router?
The router measures 177 x 119 x 31 mm (width x depth x height) and weighs approximately 250 grams without power adapter.
How to enable parental controls?
Access router settings, go to Content Filtering or Parental Controls. You can block specific websites and set internet access schedules by MAC address.
User questions about JWNR2000v5 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual JWNR2000v5 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JWNR2000v5 by NETGEAR.
USER MANUAL JWNR2000v5 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : JWNR2000v5
Category : Router