XWDA 75128X S UK - Tumble drier INDESIT - Free user manual and instructions
Find the device manual for free XWDA 75128X S UK INDESIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Drier |
| Brand | Indesit |
| Model | XWDA 75128X S UK |
| Capacity | 7 kg |
| Energy Class | C |
| Drying Technology | Condenser |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | 35 kg |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Noise Level | 65 dB(A) |
| Drying Programs | Cotton, Synthetics, Delicates, Timed Drying, Iron Dry, Cupboard Dry |
| Lint Filter | Yes, clean after each cycle |
| Condenser | Self-cleaning condenser |
| Water Tank | Front access, easy empty |
| Delay Start | Up to 24 hours |
| Safety Features | Child lock, anti-crease, overheat protection |
| Spare Part Availability | Lint filter, condenser, door seal, belt available |
| Repairability Index | 7.0 / 10 |
Frequently Asked Questions - XWDA 75128X S UK INDESIT
How do I clean the lint filter?
Open the door, pull the lint filter out from the bottom of the door opening. Remove the lint by hand or with a soft brush. Wash the filter under running water if necessary, then dry thoroughly before reinserting.
What should I do if the dryer stops mid-cycle?
Check the water tank: if full, empty it. Also check the lint filter and condenser for blockages. Ensure the door is fully closed. If the problem persists, consult the manual for error codes.
How often should I clean the condenser?
The self-cleaning condenser requires less maintenance, but you should check and clean the condenser unit every 30 cycles or once a month, using a vacuum or rinsing with water.
Where can I find the model number?
The model number is located on the rating plate inside the door or on the back of the dryer. For XWDA 75128X S UK, it is printed on a sticker.
Can I install a vent hose for this condenser dryer?
No, this is a condenser dryer and does not require an external vent. Moisture is collected in the water tank.
How do I use the delay start function?
Select the desired drying program, then press the delay start button repeatedly to set the delay (up to 24 hours). Press start; the dryer will begin after the delay.
What is the maximum load for synthetic fabrics?
For synthetic programs, the maximum load is 3 kg to ensure efficient drying.
Why is my laundry still damp after the cycle?
Possible causes: overloading, clogged lint filter, full water tank, or incorrect program selection. Also ensure the room temperature is not too low.
How do I reset the dryer?
Turn the program selector dial to the off position (usually '0'). Wait a few seconds, then turn it to the desired program and press start.
Where can I buy spare parts?
Spare parts can be purchased from authorized Indesit service centers or online retailers. Common parts include lint filters, door seals, and belts.
User questions about XWDA 75128X S UK INDESIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual XWDA 75128X S UK - INDESIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XWDA 75128X S UK by INDESIT.
USER MANUAL XWDA 75128X S UK INDESIT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INDESIT
Model : XWDA 75128X S UK
Category : Tumble drier