PC43 - Label printer HONEYWELL - Free user manual and instructions
Find the device manual for free PC43 HONEYWELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Desktop Label Printer |
| Print Technology | Direct Thermal |
| Max Print Width | 4.09 inches (104 mm) |
| Max Print Speed | 6 ips (152 mm/s) |
| Resolution | 203 dpi (8 dots/mm) |
| Max Media Width | 4.65 inches (118 mm) |
| Max Media Roll Diameter | 5 inches (127 mm) |
| Interface | USB 2.0, Ethernet, Serial (optional) |
| Dimensions (W x H x D) | 226 x 197 x 184 mm |
| Weight | 3.2 kg (7.1 lbs) |
| Power Supply | AC adapter (100-240V AC, 50/60 Hz) |
| Power Consumption | Max 50W, Standby 1W |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Humidity | 20% to 85% non-condensing |
| Main Functions | Label and barcode printing, on-demand or batch printing |
| Maintenance | Clean printhead and sensors regularly; replace printhead as needed |
| Safety Instructions | Use only approved power supply; avoid moisture; unplug before cleaning |
| Spare Parts | Printhead, platen roller, cutter (optional), power adapter |
| Repair Information | Refer to service manual; contact Honeywell support for repairs |
| General Info | Supports label sizes from 1.6 in to 4.65 in wide; easy media loading |
Frequently Asked Questions - PC43 HONEYWELL
What type of media does the PC43 support?
The PC43 supports direct thermal labels, tags, and receipt paper with a maximum width of 4.65 inches and roll diameter up to 5 inches.
Can I print barcodes with the PC43?
Yes, the PC43 supports all major 1D and 2D barcode symbologies, including Code 128, QR Code, and Data Matrix.
How do I clean the printhead?
Turn off the printer, open the media cover, and gently wipe the printhead with a cotton swab moistened with isopropyl alcohol. Allow to dry before closing.
What interfaces are available on the PC43?
The standard model includes USB 2.0 and Ethernet. An optional serial port or Wi-Fi module can be added.
How do I load a label roll?
Open the media cover, place the roll on the media hub, thread the label through the guides, and close the cover. Ensure the sensors are aligned with the gap or notch.
What is the maximum print speed?
The PC43 can print at up to 6 inches per second (152 mm/s) at 203 dpi resolution.
Can I use the PC43 with Linux?
Yes, Honeywell provides Linux drivers and support for Zebra Programming Language (ZPL) and Direct Protocol (DP).
How do I replace the printhead?
Power off the printer, remove the media, open the printhead latch, disconnect the ribbon cable, and install the new printhead. Torque the screws to 0.4 Nm.
What is the power consumption?
Maximum power consumption is 50W during printing; standby consumes less than 1W.
Does the PC43 come with a cutter?
The PC43 can be ordered with an optional internal cutter. If not pre-installed, a cutter kit can be added as an accessory.
User questions about PC43 HONEYWELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Label printer in PDF format for free! Find your manual PC43 - HONEYWELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PC43 by HONEYWELL.
USER MANUAL PC43 HONEYWELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HONEYWELL
Model : PC43
Category : Label printer