Stage Par CX-2 - Lighting Stairville - Free user manual and instructions
Find the device manual for free Stage Par CX-2 Stairville in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stage Par Can |
| Model | Stage Par CX-2 |
| Brand | Stairville |
| Light Source | High-power LEDs |
| Color Mixing | RGB |
| DMX Channels | 6 or 7 (selectable) |
| DMX Connector | 3-pin XLR |
| Control Modes | DMX, Master/Slave, Sound Active, Auto |
| Beam Angle | 25° |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 100W |
| Dimensions (L x W x H) | 230 x 230 x 320 mm |
| Weight | 2.5 kg |
| Housing Material | Metal |
| Cooling | Fan |
| Mounting | Floor standing or hanging bracket |
| Protection Rating | IP20 |
| Operating Temperature | -10°C to 40°C |
| Fuse | T2A (replaceable) |
| Accessories | Power cord, DMX cable (optional) |
| Features | Strobe, Dimmer (0-100%) |
| Safety | Disconnect power before maintenance; use safety cable |
| Maintenance | Clean with dry cloth |
| Spare Parts | Available from manufacturer |
| Reparability | Service by qualified technician |
Frequently Asked Questions - Stage Par CX-2 Stairville
How do I connect the fixture via DMX?
Use a 3-pin XLR cable to connect the DMX input of the first fixture to the DMX output of your controller, then daisy-chain additional fixtures from output to input. Set each fixture's DMX address using the control panel.
Can I use the Stage Par CX-2 without a DMX controller?
Yes, it has built-in standalone modes: Sound Active (responds to music), Auto (pre-programmed shows), and Master/Slave (synchronize multiple units).
How to set up master/slave mode?
Designate one fixture as master (set to Master mode) and others as slaves (set to Slave mode). Connect them via DMX cables. The master controls the slaves for synchronized effects.
What is the power consumption of this fixture?
The maximum power consumption is approximately 100W. It runs on 100-240V AC, 50/60Hz.
How do I replace the fuse?
Disconnect power, locate the fuse holder near the power input, open it, and replace the blown fuse with a T2A type (same rating). Do not use a fuse of higher rating.
Can I use this fixture outdoors?
No, it has an IP20 rating, meaning it is only suitable for indoor use. Protect it from moisture and dust.
How to clean the fixture?
Disconnect power and let it cool. Use a soft, dry cloth to wipe the housing. Avoid using liquids or abrasive cleaners.
What is the beam angle?
The beam angle is approximately 25°, providing a focused beam suitable for stage lighting.
How many DMX channels does it use?
It can operate in either 6-channel or 7-channel mode, selectable via the control panel. The channels control dimmer, colors, strobe, etc.
What is the warranty period?
Typically, Stairville offers a 2-year warranty. Check your purchase receipt or contact your dealer for exact terms. Keep the original packaging for returns.
User questions about Stage Par CX-2 Stairville
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Stage Par CX-2 - Stairville and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stage Par CX-2 by Stairville.
USER MANUAL Stage Par CX-2 Stairville
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Stairville
Model : Stage Par CX-2
Category : Lighting