LSR6332 - Speaker JBL - Free user manual and instructions
Find the device manual for free LSR6332 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Studio Monitor Speaker |
| Model Number | LSR6332 |
| Brand | JBL |
| Driver Configuration | 2-way: 6.5-inch woofer, 1-inch tweeter |
| Power Output (RMS) | 75W |
| Frequency Response | 43 Hz – 20 kHz (±3 dB) |
| Crossover Frequency | 2.2 kHz |
| Impedance | 8 ohms |
| Sensitivity | 92 dB SPL (1W @ 1m) |
| Dimensions (H x W x D) | 356 x 216 x 259 mm (14.0 x 8.5 x 10.2 in) |
| Weight | 8.8 kg (19.4 lbs) |
| Input Connectors | XLR, 1/4-inch TRS, RCA |
| Power Supply | Internal, 100-240 VAC, 50/60 Hz |
| Enclosure Type | Bass-reflex with front port |
| Magnetic Shielding | Yes |
| Built-in Protection | Low-frequency, over-current, and thermal |
| Cleaning Instructions | Wipe with a dry or slightly damp cloth. Do not use solvents. |
| Spare Parts Availability | Contact JBL professional support for replacement parts. |
| Repairability | Repairable by authorized service centers; user-serviceable parts: power cord, fuses. |
| General Safety | Use only with matching voltage. Do not expose to liquids or excessive heat. |
Frequently Asked Questions - LSR6332 JBL
What type of audio inputs does the JBL LSR6332 support?
The JBL LSR6332 accepts balanced and unbalanced signals via XLR, 1/4-inch TRS, and RCA connectors.
Can I place the speaker vertically or horizontally?
The LSR6332 can be used in either vertical or horizontal orientation. For optimal stereo imaging, maintain a symmetrical setup.
What is the recommended amplifier power?
The LSR6332 is powered (active) with a built-in 75W amplifier. No external amplifier is needed.
How do I connect the JBL LSR6332 to my audio interface?
Use a balanced cable (XLR or TRS) from your audio interface output to the corresponding input on the speaker. Set the input level switch to match your source.
What are the dimensions of the LSR6332?
The speaker measures 356 x 216 x 259 mm (14.0 x 8.5 x 10.2 inches) and weighs 8.8 kg (19.4 lbs).
Does the LSR6332 have a subwoofer output?
No, the LSR6332 does not have a dedicated subwoofer output. It is a full-range monitor; for subwoofer integration, use your mixing console or external crossover.
How do I clean the speaker?
Disconnect power. Clean the cabinet with a soft, dry cloth. If necessary, use a slightly damp cloth with mild soap. Do not use abrasive cleaners.
Is the JBL LSR6332 shielded?
Yes, the LSR6332 features magnetic shielding to prevent interference with CRT monitors or other sensitive equipment.
What is the frequency response of the LSR6332?
The frequency response is 43 Hz to 20 kHz with a tolerance of ±3 dB, providing accurate monitoring for critical listening.
Where can I find replacement parts or service?
Contact JBL Professional customer support or an authorized service center. Do not attempt internal repairs yourself.
User questions about LSR6332 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual LSR6332 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LSR6332 by JBL.
USER MANUAL LSR6332 JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : LSR6332
Category : Speaker