BP 108 A - Speaker Fun Generation - Free user manual and instructions
Find the device manual for free BP 108 A Fun Generation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active PA Speaker |
| Model | BP 108 A |
| Brand | Fun Generation |
| Power Output | 100 W RMS |
| Frequency Response | 60 Hz – 20 kHz |
| Impedance | 8 Ohms |
| Sensitivity | 95 dB |
| Driver Configuration | 8" woofer, 1" tweeter |
| Inputs | XLR/Jack combo, RCA |
| Outputs | XLR link |
| Controls | Volume, EQ |
| Enclosure Material | Plastic |
| Dimensions (H x W x D) | 254 x 300 x 380 mm |
| Weight | 5.5 kg |
| Power Supply | 100-240V AC, 50/60 Hz |
| Mounting Options | Pole mount, floor monitor |
| Color | Black |
| Accessories Included | Power cord |
| Safety Features | Overload protection |
| Maintenance | Wipe with dry cloth |
| Spare Parts | Fuses replaceable |
Frequently Asked Questions - BP 108 A Fun Generation
How do I connect the BP 108 A to a mixer?
Use an XLR or 1/4" jack cable from the mixer output to the combo input on the speaker. Ensure the speaker is powered off during connection.
Can I use this speaker as a floor monitor?
Yes, the BP 108 A can be placed on its side as a wedge monitor. It has a 90° x 60° dispersion for clear monitoring.
What is the maximum power handling?
The speaker has 100 W RMS continuous power handling. Peak power is higher, but sustained use at maximum may cause distortion.
Does the speaker support Bluetooth?
No, the BP 108 A does not have built-in Bluetooth. Connect via wired XLR or RCA inputs.
How do I reduce feedback?
Position the speaker away from microphones, reduce gain on the mixer, and use an equalizer to cut problematic frequencies. Avoid pointing the speaker directly at the mic.
What type of cables do I need?
Use balanced XLR or 1/4" TRS cables for best signal quality. Unbalanced RCA can be used for consumer devices.
Can I mount the speaker on a stand?
Yes, the bottom has a 35 mm pole socket. Use a sturdy PA speaker stand rated for at least 20 kg.
How do I clean the speaker?
Unplug the speaker and wipe the enclosure with a soft, dry cloth. Do not use liquids or abrasive cleaners.
What if the speaker stops working?
Check the power cable and fuse. If the fuse is blown, replace it with one of the same rating. If the issue persists, contact a qualified technician.
What is the frequency response?
The frequency response is 60 Hz to 20 kHz, suitable for full-range sound reproduction in small to medium venues.
User questions about BP 108 A Fun Generation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual BP 108 A - Fun Generation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BP 108 A by Fun Generation.
USER MANUAL BP 108 A Fun Generation
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fun Generation
Model : BP 108 A
Category : Speaker