PL 112 P - Speaker Fun Generation - Free user manual and instructions
Find the device manual for free PL 112 P Fun Generation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive PA Speaker |
| Model | PL 112 P |
| Brand | Fun Generation |
| Speaker Size | 12 inches (30.5 cm) |
| Power Handling (RMS) | 400 W |
| Impedance | 8 ohms |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 96 dB SPL (1W/1m) |
| Connectors | 2 x SpeakON NL4 |
| Cabinet Material | Plywood |
| Finish | Black textured paint |
| Grille | Steel with acoustic foam |
| Handles | 2 side handles |
| Flying Points | 4 x M10 threaded inserts |
| Dimensions (W x H x D) | 400 x 600 x 400 mm (15.7 x 23.6 x 15.7 in) |
| Weight | 18 kg (39.7 lbs) |
| Safety Features | Overload protection via fuse in crossover |
| Cleaning Instructions | Wipe with a dry, soft cloth; do not use solvents |
| Repairability | Replaceable speaker driver and crossover components |
Frequently Asked Questions - PL 112 P Fun Generation
How do I connect the PL 112 P speaker to an amplifier?
Use a SpeakON NL4 cable to connect the amplifier output to one of the two parallel SpeakON connectors. Ensure the amplifier is off during connection.
What is the impedance of the PL 112 P?
The speaker has an 8 ohm impedance. Connect it to an amplifier that can handle 8 ohm loads.
Can I use the PL 112 P as a floor monitor?
Yes, the shape allows it to be laid on its side as a wedge monitor. Ensure stable placement to avoid tipping.
What is the maximum power handling?
The speaker handles 400 W RMS and up to 800 W peak. Use an amplifier with matching power rating to avoid damage.
How do I clean the speaker grille?
Gently vacuum the grille to remove dust. For stubborn dirt, use a slightly damp cloth; avoid moisture entering the speaker.
Can I mount the PL 112 P on a speaker stand?
Yes, it has a standard 35 mm pole mount socket on the bottom. Use a sturdy stand rated for the weight.
Is the speaker suitable for outdoor use?
It is designed for indoor use; if used outside, protect it from rain and direct sunlight. Store in a dry environment.
What type of amplifier should I use?
Use a professional power amplifier with 8 ohm capability and output power between 400-800 W per channel for optimal performance.
How can I protect the speaker from overload?
Avoid clipping the amplifier and ensure the speaker’s RMS power rating is matched. The internal crossover fuse provides some protection.
What are the recommended transport precautions?
Always use a padded cover or case. Avoid dropping or applying pressure to the grille. Secure the speaker during transport to prevent shifting.
User questions about PL 112 P Fun Generation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual PL 112 P - Fun Generation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PL 112 P by Fun Generation.
USER MANUAL PL 112 P Fun Generation
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fun Generation
Model : PL 112 P
Category : Speaker