TOA

F-2322CU2 - Speaker TOA - Free user manual and instructions

Find the device manual for free F-2322CU2 TOA in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice TOA F-2322CU2 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Ceiling Speaker
Brand TOA
Model F-2322CU2
Frequency Response 100 Hz – 20 kHz
Power Handling 30 W (RMS)
Impedance 8 Ω
Sensitivity 90 dB (1 W/1 m)
Speaker Driver 6.5" (16.5 cm) cone
Dimensions (⌀ × Depth) ⌀ 220 mm × 100 mm
Weight 1.5 kg
Material Steel baffle, UV-resistant plastic grille
Color White
Installation Flush mount with integrated clamp
Connection Screw terminals (accepts AWG 14-18)
Protection Rating IP54 (splash-proof)
Application PA systems, background music, paging
Accessories Included Cutout template, paint shield
Warranty 5 years (limited)
Maintenance Wipe with dry cloth; avoid abrasive cleaners
Safety Install in dry location; use appropriate fixings
Spare Parts & Repairability Serviced by authorized TOA centers only

Frequently Asked Questions - F-2322CU2 TOA

What is the recommended amplifier power for the F-2322CU2?
An amplifier rated between 15 W and 60 W per channel into 8 Ω is recommended. Ensure the amplifier is turned off during wiring.
How do I install the ceiling speaker?
Cut a hole of ⌀ 195 mm (7.7 in) using the template. Insert the speaker, tighten the clamping screws until the baffle is flush with the ceiling. Connect wires to the screw terminals.
Can the speaker be used outdoors?
The F-2322CU2 has an IP54 rating, meaning it is protected against dust and splashing water. It can be used in sheltered outdoor locations, but not exposed to direct rain.
What is the maximum ceiling thickness supported?
The clamping mechanism fits ceilings up to 30 mm (1.2 in) thick. For thicker ceilings, an optional extension ring is available.
How do I clean the speaker grille?
Use a soft, dry or slightly damp cloth to wipe the grille. Do not use any solvents or abrasive cleaners. Ensure the speaker is disconnected from power before cleaning.
What if the sound is distorted?
Check that the amplifier output does not exceed 30 W RMS per speaker. Also verify that the input signal is clean and that the speaker wires are not damaged or short-circuited.
Can I paint the speaker grille to match the ceiling?
Yes, the grille is paintable. Use a high-quality spray paint. Remove the grille first, clean it, and apply several light coats. Allow to dry completely before reinstalling.
Is the speaker compatible with 70V/100V lines?
The F-2322CU2 is an 8 Ω speaker and does not include a built-in transformer. For 70V/100V systems, use an external line transformer (e.g., TOA TX- series).
What is the warranty period and how to get service?
TOA provides a 5-year limited warranty. For service, contact your local TOA distributor or authorized service center. Keep proof of purchase.
Can I daisy-chain multiple F-2322CU2 speakers?
Yes, you can connect multiple speakers in parallel (total impedance not below 4 Ω recommended). For example, two speakers in parallel equal 4 Ω. Ensure the amplifier can handle the load.

User questions about F-2322CU2 TOA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Speaker in PDF format for free! Find your manual F-2322CU2 - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. F-2322CU2 by TOA.

USER MANUAL F-2322CU2 TOA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : TOA

Model : F-2322CU2

Category : Speaker