Joy S37 - Server REVOX - Free user manual and instructions
Find the device manual for free Joy S37 REVOX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Revox |
| Model | Joy S37 |
| Form Factor | 1U Rackmount |
| Dimensions (H x W x D) | 44 x 482 x 400 mm |
| Weight | 10 kg |
| Power Supply | 100-240V AC, 50-60Hz, 350W |
| Processor | Intel Xeon Quad-Core (typical) |
| Memory | 16 GB DDR4 ECC (expandable to 64 GB) |
| Storage | 4x 3.5" SATA/SAS hot-swap bays |
| RAID Support | RAID 0, 1, 5, 10 (via hardware controller) |
| Network Interface | 2x Gigabit Ethernet (RJ45) |
| Management | IPMI 2.0 / web-based GUI |
| Cooling | 4x 40mm hot-swap fans |
| Operating Temperature | 0°C to 40°C |
| Power Consumption | Max 350W, typical 150W |
| Noise Level | 35 dB(A) idle |
| Warranty | 3 years limited |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - Joy S37 REVOX
How to factory reset the Revox Joy S37 server?
To perform a factory reset, power off the server, press and hold the Reset button on the front panel for 10 seconds, then release. Alternatively, use the IPMI web interface under Maintenance > Factory Default.
What RAID levels are supported?
The onboard hardware RAID controller supports RAID 0, 1, 5, and 10. For advanced configurations, an optional RAID card can be installed.
What is the maximum RAM capacity?
The server supports up to 64 GB DDR4 ECC memory across 4 DIMM slots.
How loud is the server during normal operation?
The noise level is approximately 35 dB(A) at idle and up to 45 dB(A) under full load, typical for a 1U server.
What is the typical power consumption?
Typical power consumption is 150W idle and up to 350W under maximum load, depending on configuration.
What is the operating temperature range?
The server can operate in ambient temperatures from 0°C to 40°C (32°F to 104°F). Above 40°C, performance may be throttled.
What is the warranty period?
The Revox Joy S37 comes with a 3-year limited warranty. Extended warranty options are available.
How to update the firmware?
Download the latest firmware from the Revox support website. Use the IPMI web interface under Maintenance > Firmware Update to upload and apply.
Which hard drives are compatible?
The server supports standard 3.5-inch SATA and SAS hard drives (HDD/SSD) in the hot-swap bays. Consult the compatibility list for approved models.
How to connect to the server remotely?
You can connect via IPMI (default IP: 192.168.1.100) for out-of-band management, or use remote desktop/SSH after the OS is installed.
User questions about Joy S37 REVOX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual Joy S37 - REVOX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Joy S37 by REVOX.
USER MANUAL Joy S37 REVOX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : REVOX
Model : Joy S37
Category : Server